 |
 |
 |
|
Kent-Moore Tools
Kent-Moore EN-50837 Tensioner Arm Retainer (EN50837)
Malibu and ATS, 2014 Regal The timing chain tensioner is accessed through a very small plate in the front cover, and tension must be relieved to allow camshaft, actuator, and timing chain service. Once the cover plate is removed, EN-50837 engages the tensioner arm, and moves it forward to disengage the ratchet mechanism, allowing a screwdriver to be used to retract the tensioner plunger. Once the plunger is retracted, EN-50837 moves the arm back, and is installed further through the arm to engage the locking hole in the tensioner body. Due to the limited access, EN-50837 may be made at a 90 degree angle to its handle.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Note:
- Our vendors continue to have issues with Global Supply Chain across a range of categories and components impacting our ability to provide detailed/ planned delivery timing across a large swath of our Product Portfolio. These categories impacted include (but are not limited to) such lower-level products as: steel, plastic, electrical component, and microprocessor chips. These ongoing issues, often with last minute notification from the supply base, have negatively impacted planned production beyond our control.
|
|
|
|
|
|
|