Home > Shop By Brand > Kleanstrip >

Kleanstrip QTP0123 Bulldog Adhesion Promoter, Quart
Kleanstrip QTP0123 Bulldog Adhesion Promoter, Quart
 
Tillman Tools Price: $69.23
Manufacturer Part Number: QTP0123
Note: We ship from different warehouses across the country. No local pickups.


SKU: KLSQTP0123
Qty:

Description
 

KleanStrip QTP0123 Bulldog Adhesion Promoter, Quart

BulldogĀ® Adhesion Promoter is designed to promote paint adhesion to all automotive surfaces, even problem plastics. It works equally well on all flexible or rigid plastics, fiberglass, aluminum, glass, chrome, vinyl, galvanized metal, and painted surfaces. Bulldog acts as a tie coat by allowing several different surfaces to be painted at the same time to assure a smooth, flawless, durable finish every time. If added to the paint, it will perform as a flex agent, promoting more flexibility on plastics.
Not for sale or use in CA, CO, CT, DE, MD, NH, RI and UT.
WARNING: This product can expose you to chemicals including Ethylbenzene and Styrene, which are known to the State of California to cause cancer, and Toluene, which is known to the state of California to cause birth defects and other reproductive harm. For more information go to www.p65warnings.ca.gov.

For best results apply Bulldog Adhesion Promoter at a temperature above 60 degrees F and away from direct sunlight and strong breezes.

Surface Preparation:

For best results, first clean all areas to be painted with KleanStrip PrepAll Wax & Grease Remover. Then, thoroughly clean with Bulldog Abrasive Cleaner. Rinse completely with water and let the part dry. When repairing peeling painted surfaces, all loose and peeling paint must be removed. To blend repaired areas with the original paint, sand the surface and the surrounding paint with 400 or finer grit sand paper until a smooth junction is attained. If the paint chips while sanding, it may be necessary to strip and repaint the entire part.

To Apply Bulldog Adhesion Promoter:

Directions: Using a spray gun, apply an even, light mist coat. Wait 3-5 minutes and apply a second coat. Wait 15 minutes before applying the paint or primer but not longer than.

Clean up:
After each use of KleanStrip Bulldog Adhesion Promoter, All tools and spills should be cleaned immediately with lacquer thinner. Care should be taken to keep from exposing freshly painted surfaces to solvents.

For KleanStrip Catalog click here

Looking for a different KleanStrip product? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Note:
  • Our vendors continue to have issues with Global Supply Chain across a range of categories and components impacting our ability to provide detailed/ planned delivery timing across a large swath of our Product Portfolio. These categories impacted include (but are not limited to) such lower-level products as: steel, plastic, electrical component, and microprocessor chips. These ongoing issues, often with last minute notification from the supply base, have negatively impacted planned production beyond our control.

Be the first to write a review »