Home > Shop By Category > Electrical System \ Wiring > Tools
Sort By:
Page of 1
Kent-Moore EL-50334-2 Type A Female to Mini B Male USB Cable (EL50334-2) Kent-Moore EL-38125-38 Terminal Remover (EL38125-38) Kent-Moore EL-50334-11 DIT Adapter Harness (EL50334-11)
Kent-Moore EL-38125-38 Terminal Remover
Tillman Tools Price: $65.21
Kent-Moore Tools
Kent-Moore EL-50334-2 Type A Female to Mini B Male USB Cable (EL50334-2)

TYPE A FEMALE TO MINI B MALE USB CABLE







Kent-Moore Tools
Kent-Moore EL-38125-38 Terminal Remover (EL38125-38)

Used to remove Tyco/Delphi DSQ 280 terminals from the wired fuse block. The tool features fingers that react against the end of the terminal to force it from the cavity. Other methods of removal can damage the terminal and/or connector / cavity.






Kent-Moore Tools
Kent-Moore EL-50334-11 DIT Adapter Harness (EL50334-11)

This Infotainment Cable allows communication between the USB port located in the center console of the vehicle and the radio. This cable bypasses the vehicle harness in order to rule it out as a problem during diagnostics.






Kent-Moore J-34898 High Current Shunt Kent-Moore EL-50334-50 Infotainment Diagnostic Kit (EL50334-50) Kent-Moore GE-48494 Power Electronics Pressure Test Adapter Kit (GE48494)
Kent-Moore J-34898 High Current Shunt
Tillman Tools Price: $79.21
Kent-Moore J-34898 High Current Shunt (J34898)

Kent-Moore EL-50334-50 Infotainment Diagnostic Kit

This adapter kit allows the technician to more easily and definitively pinpoint vehicle component failures within the vehicle Infotainment system and to differentiate symptom causes between vehicle vs. customer hardware.

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Kent-Moore Tools
Kent-Moore GE-48494 Power Electronics Pressure Test Adapter Kit

These adapters are necessary to pressure test the power electronic module assembly prior to filling with coolant. One adapter will be used with J-24460-01 radiator pressure tester to apply pressure to assembly. The other adapters cap off the ports in the power electronics assembly.





Kent-Moore EL-47728 Electronic Column Lock Actuator (EL47728) Kent-Moore EL-50334-10 Infotainment Data Cable (EL50334-10) Kent-Moore EL-51578 M.O.S.T. 50 Test Kit
Kent-Moore EL-51578 M.O.S.T. 50 Test Kit
Tillman Tools Price: $297.55
Kent-Moore Tools
Kent-Moore EL-47728 Electronic Column Lock Actuator

For GM / General Motors. 1997-up Corvette uses an electronic column lock (ECL) to lock the steering wheel when the ignition is off. EL-47728 is an electronic tester that actuates the ECL from the unlocked to locked positions, and back. During actuation with EL-47728, various mechanical diagnostic procedures are performed to determine if both the electrical and mechanical portions of the ECL are operating correctly.





Kent-Moore Tools
Kent-Moore EL-50334-10 Infotainment Data Cable (EL50334-10)







Kent-Moore Tools
Kent-Moore EL-51578 M.O.S.T. 50 Test Kit

EL-51578 is a set of 6 header connectors with looped circuits and 1 harness connector with looped circuits that allow systematic elimination and bypassing of individual modules on the Media Oriented Systems Transport (MOST 50) bus. As modules are eliminated the bus Electronic Control Line (wakeup signal) can also be monitored and analyzed. If the DTC goes away, then the bypassed module is at fault. If two adjacent modules on the bus are bypassed without a change in the infotainment symptom/DTC U0028 status, then the wires and connectors would require further analysis and repairing. These header bypass connectors would be used along with Radio DTC U0028/Data Display for root cause analysis. Without these tools the technician may cause terminal damage, or may not use the proper twisted pair wire while attempting a manual jumper bypass.







Kent-Moore EL-51372 Camera Calibration Mat Kent-Moore J-34182 Pin Crimper (J34182) Kent-Moore EL-49642 SPS Programming Support Tool (EL49642)
Kent-Moore J-34182 Pin Crimper
Tillman Tools Price: $714.27

Kent-Moore EL-51372 Camera Calibration Mat

Vehicle exterior cameras that provide images for navigation display require verification of correct alignment when a camera or video processing module (VPM) is replaced. The EL-51372 Mat has a series of three white squares printed on a 4' x 15' non-glare black polymer material.

The Mat is unrolled and accurately positioned either alongside or at the front or rear of the vehicle. The cameras focus on the location of the 4 corners where the white squares meet the black and the system software is then calibrated to align the cameras to those locations using GDS2. This is one Mat that is moved around the vehicle depending on the camera needing calibration.

The Mat ships in an exterior carton and there is an internal carton with an instructional decal affixed to the carton that is used for permanent storage of the Mat.

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools & aftermarket Harley Davidson parts to get the job done right.

Kent-Moore Tools
Kent-Moore J-34182 Pin Crimper

This tool is used to crimp Deutsch type terminals.

SERIES 60, TWO CYCLE 71, TWO CYCLE 92, TWO CYCLE 149, MT 600, HT(B) 700 and CL(B)T 700, HT(B) 750, CL(B)T 750, 3000 SERIES, B200, B300, B400, T200, and T300, 3700 (formerly 3070PT), 4000 SERIES, B500, T400, and T500, 4700/4800 (formerly 4070/4076)





Kent-Moore Tools
Kent-Moore EL-49642 SPS Programming Support Tool (EL49642)

Currently, a single module SPS programming event requires a fully charged battery to accomplish a reprogramming event without failure. Advanced technology vehicles (example: 2-Mode Hybrid) require a sequential SPS event where as many as 6 discrete modules are programmed in one event taking 45 to 90 minutes. In these cases even a fully charged battery is not sufficient to maintain system voltage during a sequential event. The main function of this tool is to act as a clean power supply during re-programming to avoid module failures. The switching power supply design of the quiet, small and compact tool converts 120 volt AC line input to a virtually noise-free, nominal 13.4 volt DC output, up to 55 amps output. The internal breaker protects against reverse battery polarity, brownout, over-temperature and over-current situations for a long and trouble-free tool life.








Kent-Moore EL-38125-580 Kit, Global Terminal Rel Tools (EL38125-580) Kent-Moore EL-50334-100A Multimedia Interface Test Kit Kent-Moore J-34522-D WT Electronic Repair Kit (J34522-D)
Kent-Moore Tools
Kent-Moore EL-38125-580 Kit, Global Terminal Rel Tools






Kent-Moore Tools Kent-Moore EL-50334-100A Multimedia Interface Test Kit (EL50334-100A)  The Multi-Media Interface Tester (MIT) will verify AUX, USB and Bluetooth connectivity. The MIT will confirm Bluetooth pairing with the GM vehicle and it can emulate an incoming call (i.e. cell phone). The MIT will also verify the audio streaming (A2DP) capability of the radio. MIT features/benefits: Easy to use, intuitive, minimizes labor time and eliminates potential for unwarranted charge-back, software upgradeable for future technology changes, provides a "known good device" for accurate and reliable diagnostics. Includes a storage case that will accommodate the MIT and related adapters, etc.    Email for availability. Kent-Moore Tools
Kent-Moore J-34522-D WT Electronic Repair Kit

For Allison. This tool incorporates the essential tools required for terminal repair.