Submit search
Klann Tools KL-1520 Pair of Jaws Size 2N 155-195mm
For Klann Universal Spring Compressors KL-2000 & KL-0015
Suitable for McPherson-type suspension struts
Applications: Alfa Romeo, Audi, BMW, Chrysler, Citron, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mitsubishi,
For Klan Tools Catalog click here
Looking for other Klan Tools? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Klann Tools KL-1512 Pair of Jaws Size 1A for Klann Universal Spring Compressors
The spring holder can be used in connection with the spring compressors KL-0015, KL-0013, KL-0014 and KL-2000.
For spring Ø: 90mm (inside) - 145mm (outside)
Application:
Alternative tool: VAG1752/7
Pair of special tools for professional removal and installation of right=hand wound coil springs and shock absorbers on passenger car chassis systems.
Looking for a different Klan tool Please give us a call!! (909) 334-4400
Tiger Tool 11001 Axle Shaft Puller
Easily remove even the most seized axle shaft in minutes on medium- to heavy-duty Dana, Eaton and Rockwell drive axles.
We take details seriously. The head of the driver is rounded, ensuring the load of the hammer’s force is more accurately distributed down the center of the tool. Top grade metals and various treatments safeguard the integrity of the driver, enabling it to be struck again and again.
Pullcams are preloaded behind the axle flange. The force of the impact shocks the cone washers free, allowing the axle shaft to be released with ease. Pullcams are heat-treated to minimize wear and prevent rounding off – maintaining the tool’s longevity and effectiveness.
Application Medium- to heavy-duty Dana, Eaton and Rockwell drive axles
Warning: This product may expose you to chemicals including Nickel, which are known to the State of California to cause cancer, birth defects or other reproductive harm. www.P65Warnings.ca.gov
Looking for Tiger Tool? Please give us a call!! (909) 334-4400
S-21307 15040 Hendrickson Intraax Tri-Functional Wide Bushing Adapter Alt
This kit will easily remove and install the Hendrickson Intraax Tri-Functional bushing while the suspension remains on the trailer. Made to service most Hendrickson, Hendrickson Turner, Watson Chalin, and Automann bushings.
Direct replacement for HENDRICKSON S21307 or S-21307 and 15040. Also sold as a kit with a hydraulic ram. This adapter set can be used with ONI318T Universal Leaf Spring Pin & Suspension Bushing Remover & Installer Hydraulic Kit replacement for 15030 and Holland Tool 50544012 or HDL-50544012.
Applications include 5.75" bushings such as Automann TS TRB5912, Dayton TS 334-1576, Euclid TS E-10729A, Flagg TS HT245, Gaff TS 13628, Hendrickson TS S-24691 and others.
Our set does not include a foot pump to operate it. We recommend our mechanics using a 10000 PSI pump when operating this equipment.
For Heavy Duty Truck Tools catalog click here
Looking for a different Heavy Duty Truck Tool? Please give us a call!! (909) 334-4400
S-24736 & 15041 Hendrickson Narrow Bushing Remover & Installer Tool Kit Alt.
This kit will easily remove and install the Hendrickson Vantraax Tri-Functional bushing while the suspension remains on the trailer. Made to service most Hendrickson, Hendrickson Turner, Watson Chalin, and Automann bushings.
Direct replacement for HENDRICKSON S24736 or S-24736 and 15041. This adapter set can be used with ONI318T Universal Leaf Spring Pin & Suspension Bushing Remover & Installer Hydraulic Kit replacement for 15030 and Holland Tool 50544012 or HDL-50544012 (NOT INCLUDED).
Applications:
This set does not include a foot pump to operate it. We recommend our mechanics using a 10000 PSI pump when operating this equipment.
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right..
Freightliner /Peterbilt 15030 50544012 Low Air Leaf Pin & Suspension Bushing Remover & Installer Hydraulic Tool Kit 18 Ton Alt
This kit delivers 18 tons of hydraulic force for the removal and installation of the truck spring eye bushing assembly fast and easy. Made to service bushing assemblies without removing leaf spring hangers and spring assemblies from the vehicle.
Direct replacement for Tools 15030 and Holland Tool 50544012 or HDL-50544012.
Designed to fit:
Our set does not include a pump to operate it. We recommend our mechanics using a 10000 PSI pump when operating this equipment.
For Freightliner Truck Tools catalog click hereFor Peterbilt Truck Tools catalog click here
Looking for a different Peterbilt or Freightliner or Peterbilt truck tool? Please give us a call!! (909) 334-4400
Klann Tools KL-0025-2 Short Version Spring Compressor with Pressure Plates
Applications: Mercedes & Chrysler
Product Card
It allows the removal of rear axle springs in very limited room conditions without having to lower the rear axle support.
Suitable for Mercedes 190 (W201), C-Class (W202), CLK (W208), E-Class (W210), S-Class (W140), SL (R129), SLK (R170), W116, W123, W124, and W126, front and rear axle. Ford, GM, Chrysler, VW T2 and LT, Fiat, Hummer, Mazda, Toyota, Nissan, Mitsubishi, Renault, Peugeot, Volvo, etc.
For Klann Tools catalog click here
Looking for Klann Tools? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job
Volvo/Mack 9996154, 9992614, 9992671, 9999210 and 9992670 Spring Pin Metal Suspension Bushing Remover & Installer Kit
Direct replacement for OEM part numbers 9996154, 9992614, 9992671, 9999210 and 9992670.
Covers most slotted bushings such as 20533294, DT 80081311 found in Volvo FM12, D11, D12, D13, Mack MP7, MP8, MP10, DB / Renault (430/450/460), DAF & MAN-TGA (140/414/460) front axle spring ROR, SAF.
This kit delivers 12 tons of hydraulic force for the removal and installation of the truck spring eye bushing assembly fast and easy. Made to service bushing assemblies without removing leaf spring hangers and spring assemblies from the vehicle.
Thisset does not include a pump to operate it. We recommend our mechanics using a 10000 PSI pump when operating this equipment.
Also a Volvo Penta Tool
For Volvo Tools Catalogue click here
For Mack Tools Catalog click here
Looking for a different Volvo or Mack Tool? Please give us a call!! (909) 334-4400
Freightliner/Peterbilt Leaf Spring Pin & Suspension Bushing Remover & Installer Hydraulic Kit
Fits Caterpillar & Cummins
Universal Freightliner/Peterbilt Low Air Leaf Pin & Suspension Bushing Remover & Installer Hydraulic Tool Kit is a direct replacement for TG15030, 50544012 or HDL-50544012.
Automann
MR656UB, MR656, MR782, MR714E, MR714
BATCO
44090
Dayton
RB-268, RB-205U, RB-268, RB-205, RB-234
Dyco
D046, D46, DT1155
Euclid
E-8804
Flagg
RB268, RB205UB, RB235, RB268, RB205, RB234, RB260
Freightliner
1613962000, 1616412000, 1618035000, 6813250150, 6813250250
Gaff
11083
Hendrickson
51209, 52296
International
3538115C1
Meritor
MR782
Peterbilt
52296
World America
WA12-5136
Sleeve
Rod
Press Plates
#1 (Ø90*73*117 L mm)
#3 (M16*P2.0*500L)
#09 (Ø35 mm / Ø16 mm / 22 L mm)
#2 (Ø64*49*117 L mm)
#4 (M20*P2.5*500L)
#10 (Ø55 mm / Ø20 mm / 22 L mm)
#5 (M24*P3.0*500L)
#11 (Ø70 mm / Ø24 mm / 24 L mm)
#12 (Ø45 mm / Ø16 mm / 22 L mm)
#13 (Ø65 mm / Ø20 mm / 24 L mm)
#14 (Ø90/80 mm / Ø45 mm / 30 L mm)
This master kit offers 18 tons of hydraulic force to remove and install truck spring eye bushings assemblies fast and easy.
Designed to service bushing assemblies without removing leaf spring hangers and spring assemblies from Volvo, Iveco, Paccar, Scania, Man, Mercedes, Renault, Freightliner and others.
For Peterbilt Truck Tools catalog click here
Looking for a different Peterbilt Truck Tool? Please give us a call!! (909) 334-4400
Universal Leaf Spring Pin and Bushing Service Set w/ Hydraulic Foot Pump
This kit is a direct replacement for TG15030 and 50544012 or HDL-50544012.
Application: Volvo, Iveco, Paccar, Scania, Man, Mercedes, Renault, Freightliner
Designed to fit :
Our set contains a professional all-metal structure hydraulic foot pump designed to provide high-pressure power for hydraulic equipment. Featuring a maximum adjustable pressure of 10000 PSI, 3/8 fitting adapter and oil capacity of 1800cc with a a built-in safety overload pump power saver.
Looking for a different Kenworth Truck Tool? Please give us a call!! (909) 334-4400
Kenworth & Peterbilt Leaf Spring Pin & Bushing Service Master Kit
This patented design includes replacements for parts 15000, 15007, 15008 and 15011.
Fits multiple front and rear bushings from Peterbilt, Kenworth, Automann, Dayton, Dyco, Flagg, Gaff and others listed below.
Adapters Included:
ONI419T Alternative to 15008 or TG15008
ONI420T Alternative to 15007 or TG15007
ONI421T Alternative to 15011 or TG15011
All accessories are included in this kit except the hydraulic pump which must be purchased separately to run the hydraulic ram. We recommend using ONI396T our 10,000 PSI pump for best performance. (PUMP NOT INCLUDED)
Also a Volvo Penta ToolFor Kenworth Truck Tools catalog click here
Looking for a different Kenworth or Peterbilt Truck Tool? Please give us a call!! (909) 334-4400
Kenworth & Peterbilt Leaf Spring Pin & Bushing Service Master Kit w/ Hydraulic Foot Pump
This patented design includes replacements for parts 15007, 15008 and 15011. Fits multiple front and rear bushings from Peterbilt, Kenworth, Automann, Dayton, Dyco, Flagg, Gaff and others listed above.
Our kit delivers 12T of hydraulic force to remove and install truck spring eye bushing assemblies quick and easy. It will aid you in the repair without removing leaf spring hangers and spring assemblies from the vehicle.
This heavy duty removal and installation kit will reduce the shop service time offering 12 tons of pulling power and no longer requiring to remove the spring packs in the axle.
Contains a professional all-metal structure hydraulic foot pump designed to provide high-pressure power for hydraulic equipment. Featuring a maximum adjustable pressure of 10000 PSI, 3/8 fitting adapter and oil capacity of 1800cc with a a built-in safety overload pump power saver.
Kenworth Peterbilt Western Star & Freightliner Leaf Spring Pin & Bushing Service Master Kit w/ Hydraulic Foot Pump
This patented design includes replacements for parts 15000, 15007, 15008 and 15011. Fits multiple front and rear bushings from Peterbilt, Kenworth, Western Star, Freightliner, Automann, Dayton, Dyco, Flagg, Gaff and others listed above.
MR862, NRB323, 52257, 52312, 52312, B651007, B651012, RB-323
RB-308
DT1477
11763
Kenworth
B65-1007, B65-1012
MR902
RB-328
DT1474
RB328
11767
B65-6005
B65-6005, B65-1017-002
52375 52375-000
RB-324, RB-330
B65-1013, B65-6006
B651013, B656006
ONI383T Western Star & Freightliner Front Bushing Adapter Set
MR772, MR772UB
RB-263
RB263
16-14603-000, 16-17194-000, 16-17770-000, 16-18023-000
11094
This heavy-duty removal and installation kit will reduce the shop service time offering 12 tons of pulling power and no longer requiring to remove the spring packs in the axle.
Contains a professional all-metal structure hydraulic foot pump designed to provide high-pressure power for hydraulic equipment. Featuring a maximum adjustable pressure of 10000 PSI, 3/8 fitting adapter and oil capacity of 1800cc with a built-in safety overload pump power saver.
Volvo/Mack 9996154, 9992614, 9992671, 9999210, 9992670 Leaf Spring Pin & Suspension Bushing Remover & Installer Hydraulic Master Kit
This master kit offers 18 tons of hydraulic force to remove and install truck spring eye bushings assemblies fast and easy without removing leaf spring hangers and spring assemblies from the vehicle. Includes 3 hydraulic kits and a foot operated pump that will cover most bushings.
Our kits are direct replacement for OEM parts number 9996154, 9992614, 9992671, 9999210 and 9992670. Featuring patented design replacements for parts 15000, 15007, 15008, 15011, 15030 and 50544012 or HDL-50544012.
The Volvo & Mack Spring Pin Metal Suspension Bushing Remover & Installer Kit ONI295T covers most slotted bushings such as 20533294, DT 80081311 found in Volvo FM12, D11, D12, D13, Mack MP7, MP8, MP10, DB / Renault (430/450/460), DAF & MAN-TGA (140/414/460) front axle spring ROR, SAF.
The Universal Freightliner Air liner / Peterbilt Low Air Leaf Pin & Suspension Bushing Remover & Installer Hydraulic
Tool Kit ONI318T is designed to fit:
The Kenworth & Peterbilt Leaf Spring Pin & Bushing Service Kit ONI380T includes:
Looking for a different Volvo/Mack Tool? Please give us a call!! (909) 334-4400