Home > Shop By Category > Paint, Supplies & Equipment > Paint/Chemicals > Basecoat/Topcoat > Texture Coatings
Sort By:
Page of 1
Polyvance 3604-A White Bumper and Cladding Adhesion Primer (Aerosol) Polyvance 3611-A Light Gray Bumper and Cladding Coat Adhesion Primer - Low VOC, Aerosol Polyvance 3613-A White Bumper & Cladding Coat Adhesion Primer - Low VOC, Aerosol

Polyvance 3604-A White Bumper and Cladding Adhesion Primer - Aerosol

Bumper and Cladding Coat Adhesion Primer is an advanced, solvent-based coating designed to help your automotive base-clear topcoat system stick to unprimed TPO plastic bumpers. Bumper and Cladding Coat Adhesion Primer sticks tenaciously to unsanded, unscuffed raw TPO plastic. Once the Adhesion primer is dry, it can be topcoated with most base-clear systems without sanding or scuffing. (6.3 lb/gal VOC)

Bumper and Cladding Adhesion Primer is designed to permanently stick to the bumpers, side cladding, and trim found on many of today's cars, trucks, and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper and Cladding Adhesion Primer WILL stick to raw TPO and polypropylene. Once the primer is on, your basecoat-clearcoat will stick.

That’s right… scuffing and sanding is NOT necessary to get adhesion that can stand up to a pressure washer!

For Polyvance catalog click here

Looking for Polyvance Products? Please give us a call !! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 3611-A Light Gray Bumper and Cladding Low-VOC Coat Adhesion Primer, Aerosol

3611/3612/3613 Bumper & Cladding Coat Adhesion Primer is an advanced, low-VOC, solvent-based, non-sandable primer that is
designed to stick to “problem plastics” like TEO, TPO and PP without sanding or pretreatment.

The low VOC formula, sprays smoother and has improved topcoat compatibility over the original formula, plus there is no close on the window for top coating. The low VOC mean it’s legal in all 50 states and Canada. (2.09 lbs./gal. VOC)

Bumper and Cladding Adhesion Primer is designed to permanently stick to the bumpers, side cladding, and trim found on many of today's cars, trucks, and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper and Cladding Adhesion Primer WILL stick to raw TPO and polypropylene. Once the primer is on, your basecoat-clearcoat will stick. Bumper and Cladding Coat Primer may be topcoated with most solvent, waterborne base/clear topcoat and single stage systems without sanding.

That’s right… scuffing and sanding is NOT necessary to get adhesion that can stand up to a pressure washer!

For Polyvance catalog click here

Looking for Polyvance Products? Please give us a call !! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 3613-A White Bumper & Cladding Coat Adhesion Primer - Low VOC, Aerosol

3611/3612/3613 Bumper & Cladding Coat Adhesion Primer is an advanced, low-VOC, solvent-based, non-sandable primer that is
designed to stick to “problem plastics” like TEO, TPO and PP without sanding or pretreatment.

The low VOC formula, sprays smoother and has improved topcoat compatibility over the original formula, plus there is no close on the window for top coating. The low VOC mean it’s legal in all 50 states and Canada. (2.09 lbs./gal. VOC)

Bumper and Cladding Adhesion Primer is designed to permanently stick to the bumpers, side cladding, and trim found on many of today's cars, trucks, and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper and Cladding Adhesion Primer WILL stick to raw TPO and polypropylene. Once the primer is on, your basecoat-clearcoat will stick. Bumper and Cladding Coat Primer may be topcoated with most solvent, waterborne base/clear topcoat and single stage systems without sanding.

That’s right… scuffing and sanding is NOT necessary to get adhesion that can stand up to a pressure washer!

For Polyvance catalog click here

Looking for Polyvance Products? Please give us a call !! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 39853 SEM Aerosol Texture Coating Polyvance 3804-4 Low-VOC Flextex VT Variable Texture Material, Qt

Polyvance 39853 SEM Aerosol Texture Coating

IMPORTANT NOTE: Due to hazmat restrictions, we cannot ship this item overseas.

Many of our do-it-yourselfer customers do not have an air compressor and spray gun that are necessary when spraying Flextex. Since we don't make an aerosol texture spray, we are now stocking SEM texture coating in an aerosol can.

SEM 39853 Black Texture Coating Aerosol is a unique blend of flexible materials for restoring the textured finish on bumpers, dashes, fiberglass tops, and other plastic parts prior to painting.

  • Before applying texture coating, spray 1050-A Plastic Magic Adhesion Promoter.
  • Spray SEM 39853 Black Texture Coating Aerosol in light mist coats 12 to 24 inches (30 to 60 cm) from surface depending on desired texture.
  • Apply additional coats in the same manner if needed to duplicate OEM texture.
  • Be sure to apply lightly enough so that raised texture droplets do not flow together.
  • Allow to completely dry before sanding. Sand surfaces with 320 - 800 grit or use a gray scuff pad depending on desired texture. Blow off and wipe with a tack rag.

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 3804-4 Low-VOC Flextex VT Variable Texture Material, Qt

Flextex VT Low VOC is a tough, variable texture material formulated to simulate textured automotive plastics and metal. It can be used over or under most finishes and may be top-coated with Bumper and Cladding Coat paint, base/clear or single stage paint systems.

Flextex VT Low VOC has excellent durability and may be used as the finish coat where black texture is needed.

Application:

  • For best results, apply Flextex VT Low VOC over a primer-surfacer sanded with 320 grit.
  • To build texture, apply 3 to 5 light “splatter” coats, allowing flash time between coats. Move gun quickly and don’t flow out the paint. Reduce fluid flow at gun for light coats. Let dry 30 minutes if light coats are applied and 2 to 3 hours for heavier applications before top coating. Flextex VT can be top coated at any time after the minimum dry time.
  • After Flextex VT has completely dried, (if desired) top coat with a light coat of Bumper and Cladding Coat followed by one or two more wet coats. If another type of top coat is needed, use a lacquer compatible top coat system.
  • Clean spray gun immediately after use with lacquer thinner.

For all Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.