Polyvance 6012C-240 Ceramic Core Assembly 200W 240V

IMPORTANT NOTE: This is the version for countries that have 220-240 volt power. If you are in the US or Canada, DO NOT ORDER THIS ONE! Instead, order the 110-volt heater by clicking here.

This is the 240-volt ceramic heater core that is part of our 240-volt 6012 series of airless welding elements. These things rarely burn out. Normally, the ceramic will break when the airless welding element is dropped. For whatever reason, this is part you need if your airless welder isn't getting hot anymore.

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 6012-EUR Ceramic Core Replacement Element, 200W, 240V, Euro Plug

This is ceramic element assembly that comes with the ATVPRO kit, the KCWPRO kit and other Airless Plastic Welders with an Australian plug. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This cycle happened 24 times a day for 9 months (a total of 6,500 cycles) and the element never burned out.

Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core! Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.

We got tired of dealing with suppliers who said "this is what we have to offer. Take it or leave it." So, we started from scratch and designed our own.

• We wanted an element that would last a long time, so we designed it with a ceramic element.
• We wanted an element that had a replaceable heater so that you don't have to buy the entire assembly if the heater breaks or burns out.
• We wanted an element that gets hot quickly and has enough power to keep the element hot, so we made it 200 watts. This has WAY more power than most off-the-shelf elements. Most off-the-shelf elements are typically in the 40W to 80W range.

As a reminder, this element has and Euro plug

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 6012-P Replacement Ceramic Element 200W 120V with US Plug

This is ceramic element assembly that comes with the ATVPRO kit, the KCWPRO kit and other Airless Plastic Welders with a North American plug. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This cycle happened 24 times a day for 9 months (a total of 6,500 cycles) and the element never burned out.

Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core! Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.

We got tired of dealing with suppliers who said "this is what we have to offer. Take it or leave it." So, we started from scratch and designed our own.

• We wanted an element that would last a long time, so we designed it with a ceramic element.
• We wanted an element that had a replaceable heater so that you don't have to buy the entire assembly if the heater breaks or burns out.
• We wanted an element that gets hot quickly and has enough power to keep the element hot, so we made it 200 watts. This has WAY more power than most off-the-shelf elements. Most off-the-shelf elements are typically in the 40W to 80W range.

Looking for Kent-Moore Tools? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 6012 Ceramic Core Replacement Element, Model 7, 200W, 120V

This is the replacement element for the Mini-Weld Model 7 Airless Plastic Welder. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This cycle happened 24 times a day for 9 months (a total of 6,500 cycles) and the element never burned out.

Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core! Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.

We got tired of dealing with suppliers who said "this is what we have to offer. Take it or leave it." So, we started from scratch and designed our own.

• We wanted an element that would last a long time, so we designed it with a ceramic element.
• We wanted an element that had a replaceable heater so that you don't have to buy the entire assembly if the heater breaks or burns out.
• We wanted an element that gets hot quickly and has enough power to keep the element hot, so we made it 200 watts. This has WAY more power than most off-the-shelf elements. Most off-the-shelf elements are typically in the 40W to 80W range.

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 6012-240 Ceramic Core Replacement Element, 200W, 240V, Model 7

IMPORTANT NOTE: This is the version for countries that have 220-240 volt power. If you are in the US or Canada, DO NOT ORDER THIS ONE! Instead, order the 110-volt element by clicking here

This is the replacement element for the Mini-Weld Model 7 Airless Plastic Welder. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This cycle happened 24 times a day for 9 months (a total of 6,500 cycles) and the element never burned out.

Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core! Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.

We got tired of dealing with suppliers who said "this is what we have to offer. Take it or leave it." So, we started from scratch and designed our own.

• We wanted an element that would last a long time, so we designed it with a ceramic element.
• We wanted an element that had a replaceable heater so that you don't have to buy the entire assembly if the heater breaks or burns out.
• We wanted an element that gets hot quickly and has enough power to keep the element hot, so we made it 200 watts. This has WAY more power than most off-the-shelf elements. Most off-the-shelf elements are typically in the 40W to 80W range.

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 6012-AUS Replacement Element Ceramic Core, 240V, Australian Plug 200W

This is ceramic element assembly that comes with the ATVPRO kit, the KCWPRO kit and other Airless Plastic Welders with an Australian plug. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This cycle happened 24 times a day for 9 months (a total of 6,500 cycles) and the element never burned out.

Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core! Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.

We got tired of dealing with suppliers who said "this is what we have to offer. Take it or leave it." So, we started from scratch and designed our own.

• We wanted an element that would last a long time, so we designed it with a ceramic element.
• We wanted an element that had a replaceable heater so that you don't have to buy the entire assembly if the heater breaks or burns out.
• We wanted an element that gets hot quickly and has enough power to keep the element hot, so we made it 200 watts. This has WAY more power than most off-the-shelf elements. Most off-the-shelf elements are typically in the 40W to 80W range.

As a reminder, this element has and Australian plug

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.