Home > Shop By Category > Body Structure > Exterior Body > Bumper > Bumper Repair Tools
Sort By:
Page of 1
Polyvance 5700HT 230V Mini-Weld Model 7 Airless Plastic Welder, 230V, Euro Plug Polyvance R02-07-03-NT Polypropylene Strip 13/64" x 1/16" 30 ft. Natural
Polyvance 6149 Sensor Hole Cutting Kit
Tillman Tools Price: $204.99
Polyvance 6076 Bumper Stabilizer
Tillman Tools Price: $374.99

Polyvance 6149 Sensor Hole Cutting Kit

Polyvance's Sensor Hole Cutter Set lets you cut perfectly round holes into new and aftermarket bumper covers. The newly created, parking-distance sensor holes are cut cleanly with a perfectly finished edge. Polyvance's sensor hole cutters have a sharp-edged cutter that slices through the plastic and will not stretch and warp the plastic. Because the dies are threaded already; you do not need two wrenches. 6-hole sizes: 16mm, 17mm, 18mm, 19mm, 22.5mm, 27mm.

Quit using a stepped drill bit. Polyvance's quality and well-thought-out design makes it way easier to use than a lot of the sensor hole cutter kits out there. Most other sensor hole cutter kits rely on some clunky dies and punches that must be flipped over in the correct order to cut the hole. Their so-called "cutter" does not have a sharp edge to cut the plastic. Instead, the plastic is stretched until it breaks as it gets jammed into the die leaving the bumper stretched, warped, and dimpled. Not only that, but cutting a hole requires four pieces... a bolt, a "cutter" (if you want to call it that), a die, and a nut. All of these pieces must be stacked in a convoluted way to even get started. (And you ARE going to drop pieces trying to stack them.) Plus, you are going to need two wrenches... one to drive the bolt and one to hold the nut.

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Polyvance 6076 Bumper Stabilizer

Polyvance’s 6076 Bumper Stabilizer is designed to help support today’s large, complex, multi-piece bumpers for easy repair and assembly. The Bumper Stabilizer attaches to your existing scissor stand and provides multiple adjustable anchor spots and bungee cords to precisely support fragile bumper components during assembly or repair. Bumper components can be held in virtually any position, allowing one technician to work on a bumper without the risk of dropping it on the floor and damaging the paint.

The Bumper Stabilizer has six adjustable anchor points and six adjustable bungee cords of various lengths to allow a single technician to safely fixture and assemble bumpers of virtually any size or shape. Front bumpers with large grille openings don't have much inherent structure when the grilles are not installed. The grille opening will flex and distort, making it difficult to install. By supporting your bumper on the Stabilizer, you can install the grille and other trim in your freshly painted bumper without fear of scratching or damaging it.

Two and three-piece bumpers are much easier to assemble with the Bumper Stabilizer. Use the bungee cords to hang the top or side pieces to ensure that they won't fall off and get damaged. Then with the bumper's lower part secured, you can easily pop the parts together to complete the assembly. The Bumper Stabilizer is also perfect for supporting bumpers while fixturing and prepping them for repair. Often a bumper torn in a high-stress area will be hard to hold together with aluminum tape alone. To assist in the repair process, you can use the bungees in the Bumper Stabilizer to hold the crack together while you fixture, prep, and weld the tear.

The Bumper Stabilizer is made in the USA and is easily assembled and attached to one of your shop's scissor stands. The six-foot wide upper arms are wide enough to support the largest truck or SUV bumpers. Use a Polyvance Bumper Mate 2 or a piece of plywood on the top of the scissor stand to provide support. A moving pad can be used to keep paint from being scratched. This simple and flexible combination of items will be your go-to bumper repair workstation for many years to come.

Scissor stand, table, and pad are not included.

For Polyvance Catalog click here

Looking for Polyvance Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.