Submit search
Baum Tools T10422A VW and Audi Diesel 10mm Actuator Socket
For Audi Tools Catalogue click here
For VW Tools Catalogue click here
Looking for a different Audi /VW Tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Stallion ST-253 ZTSE4642 International/Navistar Injector Sleeve Installer Tool Alt
Used to install the injector sleeves into the cylinder head. This tool typically works with EGR motors. Please consult manual or give us a call to determine which tool is needed if you're uncertain.
Applications: DT466/DT570¸ HT570 / MAXXFORCE DT9 & DT10
Supersedes AM-ZTSE4642
Works with multiple cups including 1841095C1
For International Truck Tools Catalog click here
For Navistar Truck Tools Catalog click here
Looking for a different International Truck Tool? Please give us a call!! (909) 334-4400
Schley 16100 GM Duramax LB7 Injector Cup Puller
Removes the 2000-2004 LB7 Injector Cup without damage
General Motors offered the LB7 Duramax diesel engine as an option for the Chevrolet Kodiak/GMC Topkick and the Chevy Silverado/GMC Sierra HD between the years of 2001 and 2004.
Many of these trucks are still on the road and require routine service and repairs.
One of the common repairs is re-sealing the injector cup sleeves, which begin to leak over time. To do the job correctly and save time in the process, this Duramax LB7 Injector Cup Puller was designed to remove the injector cup and sleeve from the cylinder head without causing damage to the cup.
This tool is a MUST when re-sealing your sleeves, and working more efficiently helps the technician increase their profit producing potential.
For Schley Tools Catalogue click here
Looking for a different Schley tool? Please give us a call!! (909) 334-4400
Schley 11800 BMW Injector Puller
This tool was developed to allow easy removal of injectors on all BMW’s with direct injection
This tool was developed to allow easy removal of injectors on all BMW’s with direct injection.
On in-line 6 cylinder engines our tools is very easy to install unlike the factory tools where you must get a factory “hook” worked down around and under the injector to pull up. Our tool allows you to simply screw the tool on to the top of the injector then with 1 or 2 taps with slider the injector will come out easily.
On the V-8 twin turbo engines BMW does supply a tool to remove injectors. Our tool with its compact size allows easy installation to the injector and easily pulls injectors out. This easy removal greatly reduces the amount of time to replace injectors which makes more profit for technicians in the end.
For BMW Tools Catalog click here
Looking for a different BMW tool? Please give us a call!! (909) 334-4400
Schley 17200 Cummings 5.9L & 6.7L ISBE & HPCR Injector Puller
Designed to remove diesel injectors from Dodge Cummins ISBE HPCR 5.9L and 6.7L engines produced from 2003 to current model year, which are equipped with the high-pressure common rail fuel system.
The 17200 enables the technician to quickly and efficiently remove diesel injectors that have become heavily coated over time with carbon between the tip and head. Simply remove the wires and retaining bolts, then slip the puller cup in the groove on the injector, and lever it out.
Stallion ST-1227 Cummins 855 Injector Sleeve/Cup/Tube Installer Alt
Comes with a lifetime warranty!
This tool works on Heavy Nose and Thin Nose cup numbers 3011934¸ 3070486¸ 3406702¸ FP3070486¸ 419619251¸ 719251¸ 240-1009¸ 3011935¸ 3071147¸ FP3071147¸ 419619253¸ 240-1010
Applications may include:
For Stallion Tools Catalog click here
Looking for Stallion Tools? Please give us a call!! (909) 334-4400
Assenmacher GM245 Fuel Injector Seals Tool
Used for replacing the fuel injector Teflon seals on General Motors 2.0L & 3.6L engines with Hitachi fuel injectors (2010-2017) and 2.0L,2.4L, 2.5L, 5.3L & 6.2L engines with Bosch, Continental & Delphi fuel injectors (2012-2017)/ Also used on Subaru (2014-2019) 2.0L/2.4L turbo engines.
Comparable to EN-49245, EN-49245-SUB, EN-51105 & 18683AA000
The Hitachi SIDI system used on 2010-2012 LF1 3.6L V6 and LAF 2.0L ECOTEC has 2 seals in the injector tip. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head.
For General Motors Tools Catalog click here
Looking for a different General Motors Tool? Please give us a call!! (909) 334-4400
Schley 16300 Ford Power Stroke Diesel Injector Puller
Pulling 2011 to current 6.7 Ford Power Stroke Diesel Engine Injectors with heavy carbon buildup is challenging and could damage the head or injector if the injector is not pulled straight.
Schley #16300 6.7 Power Stroke Injector Puller is designed to pull the injector straight and completely remove the injector from the head casting.
Perform the service in the vehicle, reduces likelihood of damaging the injector & head, reduces service time using a tool designed specifically for this application.
Features & Benefits:
Schley 16400 GM Duramax 6.6L LML Injector Puller
Servicing diesel injectors found on 2011 to 2016 GM 6.6L Duramax LML Diesel engines can be time consuming & costly because carbon builds up around the injector tip and the head making it difficult to remove the injector.
Generic pullers don't pull straight causing the injector to rock to one side. This could damage the head & injector beyond repair.
The Schley 16400 injector puller is specially designed to mount to the cylinder head in the vehicle. The design pulls the injector straight reducing the chance of damaging the injector or head. The puller also removes the injector completely from the head, other competitor pullers fall short. Save time and money using this tool.
Monaco 30161 J-46904 Detroit Diesel Injector Cup Remover & Installer
For Detroit Diesel 60 series
Similar to J-46904 (Year 2004 & 2005 )
Monaco Tool Company manufacture tools to serve the following brands: Caterpillar, Eaton Fuller Transmission, Detroit Diesel, Paccar Engines, Cummins and Navistar.
For Detroit Diesel Tools Catalog click here
Looking for a different Detroit Diesel Tool? Please give us a call!! (909) 334-4400
Caterpillar Truck Injector Sleeve Cup Tube Remover and Installer Tool Set for CAT Engine 3406E C10 C12 C13 C15 C16 C18 Heavy Duty OEM Alternative to 9U-6891.
Disassemble and Assemble the injector sleeve quickly and easily with the Injector Cup / Sleeve Puller and Driver set. The Puller threads into the old cups to remove them from the bore of the engine. The driver sets the new cups into the bore where your previous cups were.
This tool is used on CAT 3406E C10 C12 C13 C15 C-16 and C-18 Engines.
Package includes 9U6877 Thrust Bearing, 9U7258 Driver Cap, 221-9778 Puller Stud, 4K-0367 Nut - Full, 5P-8247 Hard Washer, 128-7889 Puller Bridge.
For Caterpillar Tools Catalog click here
Looking for Caterpillar Tools? Please give us a call!! (909) 334-4400
Monaco 30162 Detroit Diesel Injector Cup Remover & Installer (Year 2007)
For Detroit Diesel 60 series (2007)
9U-6891 Acert Injector Tube Sleeve Cup Remover & Installer Set Alt
Set for CAT 3406E/C12/C15
The image shows the tool assembled to remove cups. The two loose pieces are used with the threaded rod for installation.
For Kukko Tools Catalog click here
Looking for a different Kukko Tool? Please give us a call!! (909) 334-4400
Cummins ISX Injector Puller and Installer Alt. to OEM 3163483
For Cummins Catalog click here
Looking for Cummins Tools? Please give us a call!! (909) 334-4400
Schley 17600 Mercedes Sprinter 2.7L CDI Diesel Injector Puller
The kit enables technicians to take the top of the injector off easily with the included tools, allowing the parts to be removed without causing damage to the injector or valve cover.
It can save the technician on time, as well as expenses during the service.
For Mercedes Benz Tools Catalog click here
Looking for a different Mercedes Benz Tool? Please give us a call!! (909) 334-4400
Monaco 10222 9U-6891 Caterpillar 3406E/ C12 & C15 Injector Sleeve Remover/Installer with Guides
For Caterpillar 3406E/ C12 & C15 (Stainless Steel Cups Only)
Works on Caterpillar C-10, C-12, C-15, C-16, C-18 and 3406E engines. The new puller bridge can be used on all three engines.
This tool kit was design to install and remove fuel injector cups. Makes the removal process quick and easy.
Heavy duty steel process, anti-corrosion, high precision and hardness that provides a much longer service life.
Looking for a different Caterpillar Tool? Please give us a call!! (909) 334-4400
Kent-Moore J-48824 Detroit Diesel 60 Series Injector Cup Remover & Installer
This tool is used to remove and replace the injector cups. Series 60
Detroit Diesel J-48824 60 Series Injector Nozzle Cup Sleeve Tube Remover Installer Replacement Tool
Manufacturer: SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Kent-Moore J-46933 Detroit Diesel Injector Tip Copper Puller
Application: MBE 4000, MBE 900 Detroit Diesel
Stallion ST-S924 International/Navistar ZTSE4642 & ZTSE4643 Injector Sleeve Installer Tool Set
Applications: DT466E DT570 HT570¸ Maxxforce DT9 & DT10
Tap considered wear item/no warranty.
This tool works with the following cups.
Used with 303-DS110 Injector Bore Brush Set
Supersedes AM-ZTSE4642-ZTSE4643
*On 7/31/18 this tool was changed by the manufacturer to M27x2.0 threads rather than 3/4-14. On 3/10/19 this tool was changed by the manufacturer to M27x1.5 threads.
This is a high-quality aftermarket product.
Looking for a different International/Navistar Truck Tool? Please give us a call!! (909) 334-4400
Monaco 20120-A Cummins NT, N14, L10/M11 Injector Setting Fixture
For Cummins NT, N14, L10/M11
For Cummins Tools Catalog click here
Looking for a different Cummins Tool? Please give us a call!! (909) 334-4400