Submit search
Kent-Moore J-43911 Allison Selector Shaft Lever Seal Remover Set
Applications: Allison Transmission 1000 & 2000 and B series, Medium Duty Truck
3/8"-16 Shaft End
J-43911 has a .510"/.505" tapered buttress thread and is used to remove the selector shaft seal with the transmission "in-vehicle." The body of J-43911 is placed over the selector shaft, and tapped lightly to engage into the outer lip of the seal. The body of J-43911 is then turned approximately 1/4 turn to fully engage the seal. Then, the body is held, and the screw of J-43911 is tightened against the selector shaft to draw the seal from its bore.
Manufacturer: SPX/Bosch (OTC Rotunda Kent-Moore Miller)
For General Motors Tools Catalog click here
Looking for a different General Motors Tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Kent-Moore J-34513 Allison Pin Remover Set of 12 - Blue
Allison Transmissions:
SERIES 60, MT 600, HT(B) 700 and CL(B)T 700, HT(B) 750, CL(B)T 750, 3000 SERIES, B200, B300, B400, T200, and T300, 3700 (formerly 3070PT), 4000 SERIES, B500, T400, and T500, 4700/4800 (formerly 4070/4076)
Looking for a different Allison Transmission tool? Please give us a call!! (909) 334-4400
Kent-Moore J-45023-A Allison Oil Filter Wrench
This tool is used to remove the filters on the 1K/2K family of transmissions and can be utilized to remove the filters on the EP 40/50 transmissions.
Essential with Alternatives Allowed
J-45023-A has been classified by Allison Transmission as an Essential Maintenance & Overhaul Tool servicing the following product lines:
Control Main Filter Wrench (The J45023 has been superseded to a J45023-A.)
NOTE: Both the J45023 and the J45023-A will work on the 1k/2k Product Families but only the J45023-A will work with the H 40/50 EP Product Families.
For Kent-Moore Tools Catalog click here
Looking for a different Kent-Moore Tool? Please give us a call!! (909) 334-4400
Kent-Moore J-44526-2 Expanding Screw
Component of Kent-Moore J-44526 Output/Turbine Shaft Bushing Remover
For Allison 1000 & 2000 Product Families
Kent-Moore J-51606 J-43909 Allison Selector Seal Installer
Designed to install the selector shaft seal to the correct depth for proper operation. The J-51606 is a two-piece tool, allowing correct seal installation both in-vehicle and during major repair, with the selector shaft installed or removed.
Applications: Allison Transmission 1000 & 2000 and B series
For Kent-Moore Tools catalog click here
Looking for Kent-Moore Tools? Please give us a call!! (909) 334-4400
Kent-Moore J-44526-3 Receiver
Kent-Moore J-44526-1 Remover
Kent-Moore J-47279-1 Magnetic Overlay
Used with J-47279 Harness
Kent-Moore J-41411-A Allison Transmission Holding Bracket Tool
Application: Allison Transmissions
Kent-Moore J-37031-A Allison Output Shaft Seal Installer
NSN 5120-01-492-7521. Oshkosh part number 12KP819
For Allison
Required to to properly install the output shaft seal on the 500 series transmissions.
Kent-Moore J-38569 Allison Bearing & Bushing Installer
SPX-5120-01-390-1104, 1001155, FMTV, LMTV, MTV, M1078, L1A6
This tool is required for installing the P3, C6 and C7 Bushing on the MD series transmission
Kent-Moore J-24204-2 Allison Bar Stud Assembly Tool
For Trucks with Allison Transmission
Use With J24204-1, J24204-3, J24452
Part of J24204
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools & aftermarket Harley Davidson parts to get the job done right.
Kent-Moore J-44530 C3 / C4 Piston Spring Compressor
Application: 2001-up C/K Trucks with Allison LCT Transmissions
Used with J-24204-2
Kent-Moore J-47347 Allison Output Shaft Holder
Allison Essential Tools
Application: Allison 3000 Series
Tool designed to hold the output shaft in place during service on MD3060, MD3066 and 3560 transmissions in combination with the existing J-35925-2 Spanner Wrench
For Transmission Tools click here
Looking for Allison Transmission tools? Please give us a call!! (909) 334-4400
Kent-Moore J-44526 Output/Turbine Shaft Bushing Remover
Kent-Moore Allison J-44344-2 Counterbore
Component of J-44344
J-44344 has been classified by Allison Transmission as an Essential Maintenance & Overhaul Tool servicing the following product lines:
This tool is used to repair the drain plugs on HD4060 , B500 , HD4560 and HD 4070 transmissions
Kent-Moore J-44344-1 Allison Special 7/8-14 Tap
Kent-Moore J-37035 Allison Output Bearing Nut Spanner
J-37035 has been classified by Allison Transmission as an Essential Maintenance & Overhaul Tool servicing the following product lines: 4000 Series
This socket is used to properly set the torque on the HD4040 output bearing nut.
Output Bearing Nut Spanner
NOTE: The J37035-1 within the J37035 Kit is only compatible with outputs shafts that have (55) splines.
Kent-Moore J-47279 Allison 4th Gen 3000 4000 Transmissions Harness
J-47279 has been classified by Allison Transmission as an Essential Maintenance & Overhaul Tool servicing the following product lines:
3000/4000 Transmission Breakout Harness and Overlay -
This adapter harness is used with the J-39700 WTEC III Universal Breakout Box.
The magnetic overlay can be ordered separately using PN J-47279-1.
Kent-Moore J-44525-A Tool, C1 Backing Plate Selector
J-44525-A has been classified by Allison Transmission as an Essential Overhaul Tool servicing the following product lines: 1000/2000 Series
Backing plate Tool - 'C1 Backing Plate Selector Tool - (NOTE: The kit includes a clamping tool, a 4-tab selection tool, a 5-tab selection tool (silver), a pressure plate, and another pressure plate (silver).
The silver components of this kit were shipped via an Essential Tool Shipment as a J47158 Kit, refer to the following.) (NOTE: If you have the J44525 Kit and the J47159 Kit, then you do not need to order the J44525-A Kit.) (See NOTE #2, this tool/kit includes a non-required revision)
For Kent-Moore catalog click here
Looking for Kent-Moore Tools ? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military,
Kent-Moore J-44344 Allison Drain Plug Service Kit
Kent-Moore J-47275 Allison 4th Gen TCM Breakout Harness
J-47275 has been classified by Allison Transmission as an Essential Maintenance & Overhaul Tool servicing the following product lines:
TCM Breakout Harness Adapter (1k,2k,3k,4k) and Overlay (Used in conjunction with the J39700 Universal Breakout Box) This adapter harness is used with the J-39700 WTEC III Universal Breakout Box. The magnetic overlay can be ordered separately using P/N J-47275-1.
This tool is CE compliant.
Kent-Moore J-42385-AT Allison Filter Bolt Hole Repair Kit
For Allison. Thread repair kit required for the filter bolt holes on various Allison transmissions
