Submit search
Fan Clutch Hub Nut Wrench 303-454 T93T-6312-B OTC 7823 513745 Alt
Size:1-9/16" (39mm)
Used with 303-239
This is a high-quality aftermarket OEM replacement
For Ford Tools Catalog click here
Looking for a different Ford tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right
Schley 67700 Magnetic Washer Remover
This specialty designed dual ended tool has small magnets that are designed to aid in the removal of hard to reach washers that are around most types of studs.
This tool can also be used to help the technician in the removal of valve adjusting
For Schley Tools Catalogue click here
Looking for a different Schley tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Schley 87300 Audi/VW Strut Shock Nut Socket
Schley 87300 has been designed to allow for the easy removal and installation of the shock retaining nuts used on most front wheel drive Volkswagen & Audi
Removal of the lower nut is difficult as it is round on the outside and only has a slot across the top for gripping. The shock shaft can also rotate and must be held from turning when the nut is removed or installed.
Used on: Audi & VW
Schley 88251Toyota Valve Adjustment Wedge
Designed for easy valve adjustment.
Used On Toyota's with Overhead Camshaft Engine
For Toyota Tools Catalogue click here
Looking for a different Toyota Tool? Please give us a call!! (909) 334-4400
Schley 86100B-7 1/"2 Drive Mini Cooper/Volvo Brake Caliper Socket
Schley 86100B-7 1/2” brake caliper adapter has been specially designed to work with other brake caliper tools available on the market.
This adapter can be used for Mazda, BMW, Mini Cooper & Volvo vehicles.
These vehicles have smaller brake pistons than other vehicles. In operation, the tool makes clearance for new, thicker brake pads by rotating the brake piston back into the caliper until the piston is bottomed. Rotating the piston is required on most disc brake calipers which are also used as emergency brakes. Pin diameter : 0.156″ Pin to Pin:20mm
Used on:
Schley 69630 14mm Hub Bearing Remover
Threaded design helps to remove the hub bearings that are rusted to the steering knuckle, without removing the steering knuckle from the vehicle or the CV axle assembly. When utilized properly does not require the use of a press.
Used On Chrysler, GM, Ford, Honda, Nissan, Infinity, VW, Audi, Mazda, Volvo, Mitsubishi, Kia, Hummer and Other Vehicle with 14 Millimeter x 1.5 Tread
Schley 65410 30mm 12-Point Axle Nut Impact Socket
Remove and install the axle nut from the vehicle for replacing CV Drive Axle, Wheel Hub and Bearing, and other repairs.
Design for using all battery, electric and pneumatic impact wrench, breaker bar, ratchet and torque wrench, etc.
Constructed from Industrial-grade Chrome Molybdenum Alloy Steel (CR-MO) with precision forging and heat treatment which make the socket durable and long-lasting. Manganese phosphate finish to resist corrosion. Meet or exceed ANSI standard.
Schley 65420 Toyota Front Axle Lock Nut Release Tool
The lock nut release tool has a patent pending unique angle that allows the technician to easily unlock the 30 Millimeter axle nut.
Used with Toyota Avalon 2002 & later Camry 2002 & later Corolla 2003 & later Prius 2001 & later Sienna 2002 & later Solara 2004...
Schley 86400 Audi/VW Tension Pulley Spanner Wrench
Easily adjust the camshaft spur belts with idler pulleys and pin holes. Spanner wrench grips the center of the idler pulley with the protruding pins, and rotates around the off-center retaining bolt. This rotation allows for camshaft spur belt tension adjustment.
Made from heat treated alloy steel, comes with a black finish and a soft grip handle
Schley 68350 Honda S2000 Clutch Alignment Tool
This tool was developed to aid in the alignment of the clutch disc to the flywheel and cover.
This tool works on: Honda S 2000, 2000 and later
Schley 66110 6mm x 1.0 Head Handler
These unique tools make it easy to lift and maneuver cylinder heads during service.
Choose the appropriate thread size Head Handle. Simply spin Head Handler (used in tandem) into each end of the cylinder head until snug.
Schley 66120 1/4" x 20" Head Handler
Schley 66130 8mm x 1.25 Head Handler
Schley 69250 GM Duramax Flywheel Lock
Holds flywheel in place when removing or replacing the crankshaft bolt.
Simply remove the inspection window cover on the transmission, slide the flywheel lock tool through the inspection window until flywheel is engaged for removal of crankshaft.
Applications: 2001 and later 6.6 liter Duramax 2500 & 3500 diesel trucks with Allison transmissions
Schley 66750B Shielded Oxygen and Air Fuel Sensor Socket
Application Toyota, Lexus, Honda, Acura, Mazda, Hyundai, Kia, Nissan and Later Infiniti
Designed to R&R “can” type shielded oxygen sensors and air fuel sensors.
The depth and outer diameter of the socket are critical features enabling it to fit in the limited space of the heat shield.
Schley 67900 OrganizeAir
This easily movable storage device holds up to 6 tools.
Schley 67250 Harley-Davidson Front Fork Cap Wrench
Application: 1984 and later big twin Harley Davidson Motorcycles.
R&R the front fork caps when servicing fork fluids. This is required at each 10,000 mile service. This tool eliminates the need to undo electric connectors and remove the flairing on FLH, FLHT, FLTR and FLHX models.
Made from heat treated steel with a black finish.
For Harley-Davidson Tools Catalog click here
Looking for a different Harley-Davidson Tool? Please give us a call!! (909) 334-4400
Schley 67380 3/8" Brake Caliper Adapter
Designed to attach to a brake caliper tool to turn and press pistons into the brake caliper.
Applications: Jaguar X-Type 2006 & later Mazda 3 2004 & later 5 2006 & later Mini 2002 & later Volvo V50 2006 & later C30 2007 & later
Schley 68960 Toyota/Lexus 39mm 12-Point Axle Socket
This 39mm was released to help the technician remove and install 12-point axle nuts on 2007 and newer Tundra and Sequoia trucks / SUV’s.
68960 12-point forged 39 mm impact socket with 1/2” drive is the strongest in the field with the torque requirements of this application our #68960 will do the task every time without breakage.
Looking for a different Toyota or Lexus Tool? Please give us a call!! (909) 334-4400
Schley 65150 GM/Saturn Rear Camber/Toe Adjustment Wrench
This tool with its long reach and additional leverage can accurately set camber and toe adjustments on two and four wheel drive SUV's
Used with: GM 2 and 4 wheel drive, Chevy Equinox 2005 & later, Saturn VUE 2003
Klann Tools KL-0196-30 Screwdriver Set for Battery Screw Plugs
Universal application. Also suitable for the ventilating-/locking screw on the radiator; for example on BMW vehicles.
This tool is designed for loosening and tightening the cross-recessed plastic screw plug on the starter battery or plastic radiators without the risk of damage.
Technical Data:
Includes:
For Klann Tools Catalog click here
Looking for a different Klann Tool? Please give us a call!! (909) 334-4400
Schley 64910A Harmonic Damper Pulley Puller Update Kit
Kit Updates 64900 or 64900A to the 13450
Kit Contents (3) Legs, (6) Spring Washer
Schley 64700 GM Harmonic Damper Holding Tool
Aids in the removal and installation of the crank bolt.
Used On 48/5.3/6 Liter GM
The bolts holding these pulleys are extremely tight and removal is extremely difficult
This tool allows the factory torque to be attained
Schley 65500 GM Oil Pump Drive Removal Tool
This tool has been designed to easily remove the oil pump drive on most GM V-6 engines with the intake manifold still attached to the engine block and the cylinder heads.
The oil pump is located in a very small area that is surrounded by the intake manifold and other obstructions. With this remover the job is done easily and quickly.
Applications: GM 2.8 L V6 (1987–1989), 3.1 L V6 (1990–1994), 3100 V6 (1994–2005), 3.4 L V6 (1999 and later)
For Honda Tools Catalog click here
Looking for a different Honda tool? Please give us a call!! (909) 334-4400
Schley 11400 Ford Power Stroke 6.7L Diesel Injector Sockets
With the advent of high pressure injection, the need to replace and correctly torque the injector lines has become more critical. This unique 17mm 12-point flare nut socket and deep crows foot gives the technician the ability to remove various injector lines.
With the unique geometry of these tool the injectors can be removed without breaking and damaging the electrical connections. The crows foot can be spun by hand under the bent lines. The long socket has the clearance required and linear shape to properly torque the fuel lines.
Schley 67750A 22mm 12 & 6-Point Spline Drive Oxygen Sensor Wrench
This versatile wrench has been designed for use on most oxygen sensors with electrical connector
Schley 66100 Head Handler, Tri-Pack
Schley 65100-9 Honda/Acura Bushing Puller for 65100
Used On 65100/65130 X-Tractor Honda/Acura Bushing
Schley 67400 Bendix Brake Valve Holder
This specially designed holding tool was manufactured to hold two treadle valves so that the attaching air pressure fittings can be exchanged from the old valve to the new valve. When holding the two valves side by side, the same exact angle of the pressure fitting can be attained.
This saves a lot of time in the re-installation process. Some of these valves can have up to eight or more pressure lines with check valves.
These brake/treadle valves include: Pressure protection valves, quick release valves, brake (foot) valves, proportioning valves, and many other types
This quality tool comes with attaching hardware.
Schley 65100 Honda/Acura Rear Track Arm Bushing Remover
Honda/Acura Bushing "X-Tractor" Removal & Installation Tool
Easily and quickly remove and install trailing arm bushings. No need to remove the trailing arm from the vehicle and using a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines and emergency brake cables
Used On Honda, Civic, CRV, CRX, DEL Sol, Acura, Integra Vehicle
