Submit search
Spicer 5192 1610-1880 Series Heavy Duty Bearing Cup Installer Tool Alternative
Direct replacement for OTC 5192 or Tool 10201.
Fits driveline for Spicer 1610 to 1880 series and nearly all other heavy-duty truck and machine type u-joints with bolt-retained bearing cups.
Designed for quick and accurate installations of bearing cups on bolt-retained universal joints commonly found on class 6-8 transportation trucks and equipment for Volvo, Kenworth, Peterbilt, Freightliner & Mack.
This tool automatically aligns bearing cups during installation and reduce damage to the needle bearing.
For Diesel Tools Catalog click here
Looking for a different Detroit Diesel Tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Eaton Fuller 7075 Twin-Countershaft & Spicer Transmission Output Shaft End Yoke Puller Alternative
Design to remove the output shaft end yoke for Spicer 1610 1710 1760 & 1810 Series and Eaton Fuller Twin-Countershaft Transmissions.
Our aftermarket specialty tool will deliver 10,000 pounds of force to help the mechanic make the removal process fast and easy.
Heavy duty steel structure machined finished with powder coating to resist corrosion and ensure a long-term and reliable performance.
Direct replacement to OEM equipment parts number 7075 or OTC7075.
For Eaton Fuller Transmission Tools Catalog click here
Looking for a different Eaton Fuller tool? Please give us a call!! (909) 334-4400
Bearing Cup Installer Kit for Dana Spicer SPL 140170 & 250 Alternative to TG10217 or OTC 5191
This cap installation tool set will fit SPL 140, 170, 250 Series drivelines commonly found on class 6 - 8 transportation truck and equipment.
Designed to quickly press the bearing cups on Dana/Spicer SPL 'Life Series' quick-disconnect universal joints for Volvo, Kenworth, Peterbilt, Freightliner, Mack etc.
Our adapters ensure the specific heights for installation to reduce the risk of damage to the driveshaft, yokes, and joint.
Manufactured from high-grade steel to withstand the use of manual or impact tools.
Direct replacement for OEM parts 10217 and 5191.
Universal Heavy Duty U Joint Puller Tool for Drivelines with 1.5" to 2.2" Bearing Cups
Direct replacements for 5190A, 10102 and 24538.
Provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all Class 7 and 8 trucks and machinery.
Our proprietary manufacturing and metal treatment processes ensure threads will hold up under even the most extreme conditions, commonly found in seized u-joints on class 7 and 8 trucks.
Each glove is cast from high-grade steel to ensure the most universal fit possible while still maintaining the strength to tackle even the most stubborn U-joints.
Application:
• Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)• U-joints with bearing cups 1.5″ to 2.2″ O.D.• Spicer 1610, 1710, 1760, 1810, 1880 Series• Spicer SPL 140, 170, & 250 Life Series• Meritor (Rockwell) 16N, 17N, 18N, 1710 Series• Meritor RPL 20, 25 Permalube Series
For Heavy Duty Truck Tools catalog click here
Looking for a different Heavy Duty Truck Tool? Please give us a call!! (909) 334-4400
Spicer & Meritor 1610 1760 1810 Series Heavy Duty Yoke Puller
Direct replacement for Tools 10803 or TG10803.
This extractor was made to fit full and half round yokes on Spicer and Meritor 1610, 1710, 1760,1810 series, Spicer SPL 140, 170, 250 series and Meritor (Rockwell) RPL 20 and 25 series.
This tool set may be used with a 3/4" impact wrench to generate 25000lbs of pulling power when removing yokes with a bearing diameter of 1 7/8" and 2 3/16".
Designed for the removal of heavy-duty yokes on transmissions, driveshafts, and rear-end differentials without damaging the yoke or other components.
Heavy duty steel structure heat treated, machined and finished with powder coating to resist corrosion and ensure a long-term and reliable performance.
For Transmission Tools Catalog click here
Looking for a different Transmission tool? Please give us a call!! (909) 334-4400
Tillman 10803 29-Piece Heavy-Duty Yoke Puller Kit
Simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other components.
When it comes to quality, no detail is too small. To prolong the life of the forcing screw, the pull bar is precisely milled with a chamfer. The caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks. Tackle more jobs with fewer parts using the 10803.
J&J Tool 2000 Universal Joint Puller Kit
The J&J Tool 2000 Universal Joint Puller Kit, together with the 4Life-Update Kit, can be used on Spicer Life Series Driveshafts. This tool, result of over 7 years of meticulous design, development, and testing, offers a unique and efficient way to disassemble heavy-duty Rockwell and Spicer universal joints. The tool is cost-effective, reliable, and easy to use, boasting an impressive 7 tons of non-slip pulling power.
This J and J Tool Company Universal Joint Tool Kit a speedy solution, using half the setup time compared to other pullers. The U Joint Puller Kit’s design simplifies the disassembling process, needing only to: remove two cap screws, screw in the alignment studs, position the cables around the cross, and then pull. This results in time and cost savings.
The J&J U Joint Puller Kit is also a safer option because it is securely bolted to the yoke, preventing slips and potential injuries. The tool stands out for its durability as well, able to withstand repeated use and high levels of pressure without being damaged—if used correctly.
Unlike other methods that may damage bearings and bearing surfaces, the J&J tool cleverly avoids these areas, using cables looped around the cross. In addition, this tool can also be used to realign the bearing cap during reassembly, ensuring a smooth, accurate process, and further preventing damage.
Designed to work with multiple series and an array of alignment studs, the J&J Puller is a cost-effective, convenient, and practical tool, and made in North America. This 4 1/2 lb tool proves that size doesn't limit power—it can pull over 7 tons!
For J&J Tools Catalog click here
Are you looking for J and J Tools? Rest assured, we're here to guide you. Please, if you're unable to find the puller for universal joints that you're searching for in our catalog, do not hesitate to contact us. Our dedicated and knowledgeable team can gladly assist with any inquiries you may have, helping you find the right tool to meet your requirements. You can connect with us directly at (909) 334-4400. Tillman carries the broadest inventory of high-quality automotive tools as well as mechanic car repair tools.
Looking for hard-to-find quality automotive tools, high-end electrician tools, auto body repair tools and supplies, or forestry tools at affordable prices? Look no further! With FREE shipping on selected items, our store has everything you need. Whether you are an authorized repair shop, an independent repair shop or DIY enthusiast needing specialty automotive tools hand tools or equipment, we have you covered. Our selection also includes parts and specialty tools for Harley-Davidson, Ducati, Suzuki to ensure the job gets done right.
OTC ZTSE4330A Dana King Pin Bushing Installer Kit
For Navistar/International trucks.
To be used with appropriate Bushing Remover/Installers and Reamers, ordered separately per application. ZTSE43301A, ZTSE433011, ZTSE43302A, ZTSE433022, ZTSE43303A, ZTSE433033, ZTSE43304A, ZTSE433044, ZTSE43305A, ZTSE433055, ZTSE4331 & ZTSE433120.
Includes the basic tools which are required to install presized King Pin Bushings. To be used with appropriate installers and reamers which must be ordered separately per application. ZTSE4330-1A, ZTSE4330-11, ZTSE4330-2A, ZTSE433022, ZTSE43303A, ZTSE433033, ZTSE43304A, ZTSE433044, ZTSE43305A, ZTSE433055, ZTSE4331, ZTSE433110 & ZTSE433120
Applications: DANA: I-50, I-60, I-75, I-90, I-100S, I-100SA, I-1
Manufacturer: SPX/Bosch (OTC Rotunda Kent-Moore Miller)
For Navistar International Truck Tools Catalog click here
Looking for a different Navistar Truck Tool? Please give us a call!! (909) 334-4400
Tiger Tool 10803 Heavy Duty Yoke Puller
Looking for Tiger Tool? Please give us a call!! (909) 334-4400
