Home > Shop By Category > Marine Engines > Trim/Tilt Tools
Sort By:
Page of 1
YB-06175-2B AMT0004 Yamaha 38mmx4mm Trim/Tilt Pin Wrench Alt. AMT0020 Mercury Trim/Tilt 40mm x 6mm Pin Wrench for Mercury Verado 175-350hp Alternative AMT0019 Mercury Trim/Tilt 42mm x 6mm Pin Wrench for Mercury Four Stroke Alternative

YB-06175-2B AMT0004 Yamaha 38mmx4mm Trim/Tilt Pin Wrench Alt.

Fits all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Trim and Tilt Caps on Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150.

This wrench is not compatible with VMAX.

Yamaha OEM alternative tools AMT0004 YB-06175-2B and replacement pins AMT0005 - S-4mm

This marine pin wrench is 1/2 inch socket drive with a size of 38mm x 4mm and has a 200 ft-lb MIN pin strength

Required tool to remove the nut on the trim and tilt cylinder, use with torque wrench for proper installation

For Brush Research catalog click here

Looking for Brush Research Products? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

AMT0020 Mercury Trim/Tilt 40mm x 6mm Pin Wrench for Mercury Verado 175-350hp Alternative

Designed to fit for Mercury Verado 175-350hp.

Our marine pin wrench features a 1/2 inch socket drive - 46m-lb torque rating. 200 ft-lb min pin strength.

Must have tool made to rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder.

Direct replacement to OEM AMT0018, 40mm x 6mm pin wrench.

For Mercury Outboard Tools Catalogue click here

Looking for a different Mercury Outboard tool? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

AMT0019 Mercury Trim/Tilt 42mm x 6mm Pin Wrench for Mercury Four Stroke Alternative

Designed to fit for Mercury Four Stroke 40-115.

Our marine pin wrench features a 1/2 inch socket drive - 46m-lb torque rating. 200 ft-lb min pin strength.

Must have tool made to rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder.

Direct replacement to OEM AMT0019, 42mm x 6mm pin wrench.

For Mercury Outboard Tools Catalogue click here

Looking for a different Mercury Outboard tool? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
AMT0020 Mercury Trim/Tilt 46mm x 6mm Pin Wrench Alternative AMT0021 Mercury Trim/Tilt 31mm x 5mm Pin Wrench for Mercury Optimax Alternative Yamaha Outboard Trim Tilt Pin Wrench Set 35mm x 6mm, 32mm x 4mm & 38mm x 4mm

AMT0020 Mercury Trim/Tilt 46mm x 6mm Pin Wrench Alternative

Application: Mercury Four Stroke 150hp.

This marine pin wrench features a 1/2" socket drive - 46m-lb torque rating. 200 ft-lb min pin strength.

Must have tool made to rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder.

Direct replacement to OEM AMT0020, 46mm x 6mm pin wrench.

For Mercury Outboard Tools Catalogue click here

Looking for a different Mercury Outboard tool? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

AMT0021 Mercury Trim/Tilt 31mm x 5mm Pin Wrench for Mercury Optimax Alternative

Designed to fit for Mercury Optimax (3 Cylinder Trim Units).

Our marine pin wrench features a 1/2 inch socket drive - 46m-lb torque rating. 200 ft-lb min pin strength.

Must have tool made to rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder.

Direct replacement to OEM AMT0021, 31mm x 5mm pin wrench.

For Mercury Outboard Tools Catalogue click here

Looking for a different Mercury Outboard tool? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.

Yamaha Outboard Trim Tilt Pin Wrench Set 35mm x 6mm, 32mm x 4mm & 38mm x 4mm

Three wrench set fits ALL Yamaha, Suzuki, Johnson, Evinrude trim and tilt end caps. Ultra High Strength stainless steel brings minimum 180 ft-lbs proof strength.

*Also works on SeaStar Hydraulic Steering ends caps. If looking at a specific application measure the pin spacing and diameter!

Tools included:

MT0004 - 38mm x L-4mm pins: Fits for all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Trim and Tilt Caps on Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150. This wrench is not compatible with VMAX.

MT0006 - 32mm x S-4mm pins: Fits Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha Suzuki, Johnson, Evinrude. for Yamaha F115-F150 , I4 2.8L (F175-F200), 2-Strokes (115-225hp), VMAX

MT0009 - 35mm x L-6mm Pins: Fits the tilt caps on all Showa manufactured Trim/Tilt Units, Yamaha F115-F150 (2004-2010), all Yamaha I4 2.8L (F175-F200), Yamaha 2-Strokes (115-225hp), all Yamaha VMAX, all Suzuki, compatible with Honda, Johnson, and Evinrude.

Equivalent Yamaha Factory Tools:

  • YB-06175-2B
  • YB-06548
  • YB-06175-1A

Made of high quality materials to resist corrosion and rust, durable and impact resistance.

For Yamaha Outboard Tools Catalogue click here

Looking for a different Yamaha Outboard tool? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Mercury Trim Tilt Pin Wrench Set for Mercury Verado Four Stroke & Optimax

Mercury Trim Tilt Pin Wrench Set of AMT0018, AMT0019, AMT0020 & AMT0021 for for Mercury Verado Four Stroke & Optimax Alt.

Includes:

  • AMT0018 - (40mm x 6mm)
  • AMT0019 - (42mm x 6mm)
  • AMT0020 - (46mm x 6mm)
  • AMT0021 - (31mm x 5mm)

*These wrenches will fit ALL current model Mercury Trim / Tilt Units. (1 and 2 Pistons) PLUS Optimax (3 Pistons) Please make sure to MEASURE your end caps to confirm.

Trim/Tilt Matrix:

Make Model

Trim P/N

Mercury Verado 175-350hp

AMT0018

Mercury Four Stroke 150hp

AMT0020

Mercury Four Stroke 40-115

AMT0019

Mercury Optimax (3 Cylinder Trim Units)

AMT0021

For Mercury Outboard Tools Catalogue click here

Looking for a different Mercury Outboard tool? Please give us a call!! (909) 334-4400

Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.