Submit search
YB-ACC04-01 Yamaha Fuel Filter Cup Wrench for 4-Strokes F150-F350 Alternative
Heavy Duty OEM replacement for Yamaha parts YB-ACC04-01 or 18-79815.
Used to grip and remove the plastic fuel water separator cup from outboard motors and replace the old fuel filter. Do not use pliers or you could damage your filter cup.
This specialty tool will fit for Yamaha 4-Strokes 150 to 350 HP ( Serial Number 0406 ), F150-F350, 2.6L and 3.3L HPDI 2006 to Current with Primary Fuel Filter 6P3-WS24A.
This wrench's slotted teeth design will fit the gear like grooves at the base of the filter to create a solid grasp eliminating slippage. The tool engages the teeth, and provides appropriate leverage.
Guaranteed quick access without feeding the sensor wiring through the wrench with its star pattern design specifically made to fit and loosen your clear plastic filter cup for the on engine paper fuel filter element.
Tillman Tools will help you find the right marine specialty tools and parts for your boat repair and maintenance needs. We offer a variety of aftermarket and OEM parts to cover your engine, fuel system, ignition, intake, propellers, motors and more. When it comes to accessories, we have that covered too. Please give us a call!! (909) 334-4400
Made of high quality materials to resist corrosion and rust, durable and impact resistance.
For Yamaha Outboard Tools Catalogue click here
Looking for a different Yamaha Outboard tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Tillman Mercury Mercruiser 18-6751 Trim Tilt Manual Release Valve
Replaces OEM part #:
Application – Works on most Mercury Trim Tilt Units. Also fits for Mariner 1-Ram & 3-Ram Power Trim/Tilt Systems. Please check part number carefully before purchase to avoid placing wrong item.
Fits Most 2 & 4 Stroke Outboards with Integral Tilt & Trim
Upgrade – Due to the lots of problems with the original plastic design, this release valve is made of stainless ones. The premium stainless manual release valve is manufactured precisely and equipped with Viton seals to avoid tearing when using this relief valve.
Made of high quality steel, which has strong toughness so that you will not be interrupted during work.
Premium Material – Features top high quality solid stainless steel, durable and anti corrosion, repeatedly tested to ensure excellent performance and lasting service time.
For Mercury Outboard tools Catalog click here
Looking for a different Mercury Outboard tool? Please give us a call!! (909) 334-4400
Tillman Mercury Mercruiser 91-56775T 18-9854 90220 9-79809 Drive Shaft Adapter
Compatible Drive Units and Outboards: MC-I, R-MR, Alpha One, Alpha One/Gen II. Also Fits Mercury / Mariner metric 3 & 4 cylinder 70-125hp 25" Two stroke Carb
Interchangeable with the following:
Provides a wrench surface to rotate the drive shaft on the drive unit and the outboard motor. Professional tools save you time and money.
Heavy duty steel structure machined, welded and finished with powder coating for professional level reliability and durability. It can prevent the tool from corrosion and rust. High precision and hardness to provide a much longer service life.
YB-06676 KL-1004J Yamaha Pinion Shim Gauge Handle NOS 4.2L Alt.
Application: VF200A, VF225A, VF250A and VF250XA
This tool is used to properly insert the pinion shimming gauge into the lower unit.
Often used with YB-06675 Shim Gauge NOS to aid mechanics in selecting the proper pinion shim.
OEM Yamaha Shim Gauge Alternative to YB-06676 & KL-1004J
Manufactured with high quality materials made to last.
Tillman Mercury Mercruiser 91-43506T 18-9842 90240 Drive Shaft Bearing Retainer Wrench
Compatible with Alpha One Gen 1 Gen 2 MR Mercury 2.0L 2.4L 2.5L without preloaded pin All Mercury 3.0L. For use on retainer part number 8245191, 824519 1, 11-42632, 824519 and 853651.
Replaces Mercruiser # 91-43506T 91-43506; Replaces for Sierra 18-9842; Replaces GLM # 90240. Comparable to OEM part number both in quality and functions.
Specially designed to easily and properly remove and install the threaded bearing retainer nut under the water pump housing for Mercruiser Sterndrives Mercury Mariner outboard gearcases.
Made of top quality STEEL for great strength, meet or exceed OEM quality standard, impact resistance, sturdy and durable. High precision and hardness ensure long-term reliable service.
For Mercury Outboard Tools Catalogue click here
Tillman Mercury Mercruiser 19543T1, 19543T2, 8M0176525 I Gen II Lower Shift Cable Kit
For Mercruiser Stern Drives MC-I R MR, for Alpha one and for Alpha one Gen two (1978 and newer).
Comparable to OEM part numbers 865436A03, 19543A10, 19543A8, 21451, 18-2603 and 9-72100 both in performance and function.
Especially designed to easily replace the old and damaged cables for outboard or stern drives, maximizes their performance in all weather conditions.
Kit contains cable, Slide, Screw, Guide, Anchor, Wrapping, Insert and Wire.
Tillman Yamaha 32mm x 4mm AMT0006 YB-06175-1A Outboard Trim/Tilt Pin Wrench
Application - Fits for ALL SHOWA manufactured Trim/Tilt Units on Yamaha, Evinrude.
The kit includes four S-4mm pins, and four S4.5mm pins.
Material - Made of high quality steel, which has strong toughness so that you will not be interrupted during work.
Used to remove the trim/tilt caps, trim seals on hydraulic cylinders without damaging. Replaceable hardened stainless steel pins with gripping teeth which properly against the cap, so never worry broken your pin again.
Advantage - no rust, no deformation, excellent strength and toughness.
For General Motors Tools Catalog click here
Looking for a different General Motors Tool? Please give us a call!! (909) 334-4400
Yamaha AMT0006 YB-06175-1A Outboard Trim/Tilt Pin Wrench 32mm x 4mm Tool
Used for all SHOWA manufactured Trim/Tilt Units, Yamaha F115-F150, all Yamaha I4 2.8L (F175-F200), Yamaha 2-Strokes (115-225hp), all Yamaha VMAX, all Suzuki, Johnson, Evinrude.
Alternative to Yamaha Factory Tools YB-06175-1A, YB-06548, Replacement Pins AMT0005 - S-4mm
Our marine pin wrench features a 1/2 inch socket drive - 46m-lb torque rating. 200 ft-lb min pin strength. Comes with 8 removable pins 4mm & 4.5mm
Required tool to remove the nut on the trim and tilt cylinder, use with torque wrench for proper installation
Made of high quality materials to resist corrosion and rust, durable and impact resistance
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right
YB06335 YB06096 Yamaha Propeller Shaft & Bearing Housing Remover Tools
Direct replacement to Yamaha OEM parts number YB-06096 and YB-06335.
This tool set fits props on Yamaha 115-350hp 1994-Current and Suzuki 40-300hp 1986-Current.
Design to remove bearing carrier on standard and counter rotating lower units. Applications include (L)F200A, (L)F225A, (L)F250, LF225, LF250 and LF300 outboard engines.
Tillman Yamaha 38mm X 4mm, 32mm x 4mm, 35mm x 6mm Trim/Tilt Pin Wrench, 3-Piece Set
Three wrench set fits ALL Yamaha, Suzuki, Johnson, Evinrude trim and tilt end caps. Ultra High Strength stainless steel brings minimum 180 ft-lbs proof strength.
*Also works on SeaStar Hydraulic Steering ends caps. If looking at a specific application measure the pin spacing and diameter!
Set includes:
MT0004 - 38mm x L-4mm pins: Fits for all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Trim and Tilt Caps on Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150. This wrench is not compatible with VMAX.
MT0006 - 32mm x S-4mm pins: Fits Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha Suzuki, Johnson, Evinrude. for Yamaha F115-F150 , I4 2.8L (F175-F200), 2-Strokes (115-225hp), VMAX
MT0009 - 35mm x L-6mm Pins: Fits the tilt caps on all Showa manufactured Trim/Tilt Units, Yamaha F115-F150 (2004-2010), all Yamaha I4 2.8L (F175-F200), Yamaha 2-Strokes (115-225hp), all Yamaha VMAX, all Suzuki, compatible with Honda, Johnson, and Evinrude.
Equivalent Yamaha Factory Tools:
Tillman AMT0017 Yamaha Johnson Evinrude Mercury Mercruiser Honda Lower Bearing Carrier Puller
Compatible with Yamaha, Johnson, Evinrude, Honda, Mercury Mercruiser, (Not fit for Verado).
This powerful screw drive Lower Bearing Housing Puller will remove the toughest Lower bearing housings from lower units (115hp and above.)
Made from quality & high strength steel, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure long-term service.
For Boat Tools Catalogue click here
Looking for a different Boat tool? Please give us a call!! (909) 334-4400
Y-B06675 Y-B06676 Yamaha VF200A VF225A VF250A Shim Gauge & Handle Alt.
Application include VF200A, VF225A, VF250A and VF250XA Yamaha motors.
This tools are used to aid mechanics in selecting the proper pinion shim and inserting the pinion shimming gauge into the lower unit.
Direct replacement to OEM parts number YB-06676, YB-06675 & KL-1004J.
Yamaha Outboard Trim Tilt Pin Wrench Set 35mm x 6mm, 32mm x 4mm & 38mm x 4mm
Tools included:
