Submit search
Tillman John Deere JDG1649A Servicegard Injector Sleeve Installer Alt.
Use to properly install injector sleeve into cylinder head.
Application: John Deere 4045, 6068 tractors
Alternative to OEM JDG1649A
For John Deere Tools Catalog click here
Looking for a different John Deer tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Tillman John Deere JDH28 Valve Guide Tool Alt.
Installs valve guide in selective control valve assembly, and centering or detent cam pin guide.
Also for installing guide assembly in brake selector valve on some models.
Application: John Deere Tractors
Alternative to OEM JDH28
Tillman John Deere JDE61 Servicegard Clutch Gauge Tool Alt.
Removes and installs injection nozzles on all tractors equipped with the Robert Bosch KDEL 21 mm type injection nozzle
Application: John Deere 3029, 4039, 4045, 6059, 6068, 6076, 6081, 6101, 6466 and 6619 engines
Alternative to OEM JDE61
Tillman John Deere JDH42-2 Centering Pins Alt.
Use to center the steering meter pump
Application: John Deere tractors
Alternative to OEM JDH42-2
International/Case 675442C1 IH Injector Sleeve 6 Brass Cups Set Alt.
Aftermarket set of cups replacement to OEM parts number 675442C1.
Fuel Injector Sleeve Set Fits International 1466 886 766 1066 1440 1486 3688 Hydro 100 986 1460 1566 1086 1480 1468 966 fits Case IH 1660 1680 1640
For Case Tractor Tool Catalog click here
Looking for a different Case Tractor or Navistar tool? Please give us a call!! (909) 334-4400
Tillman John Deere R27645 / R47645 Front Tractor Weight Stud Bolts Alt.
Use to fit on the front of various John Deere tractors
Application: John Deere 2510 /2520/3010/3020 /4010/4020 /4320/4520/4620 tractors
Alternative to OEM R27645 / R47645
Tillman John Deere JDG1559 Servicegard Timing Pin Alt.
Use for static lock pin timing during installation of the injection pump.
Application: JDG John Deere engines with Stanadyne Fuel Pumps
Alternative to OEM JDG1559
Tillman John Deere JDG1560 JDG670A Drive Gear Puller Plate Tool Alt.
This tool is used to remove the drive gear from the DB2, DB4 and DE10 fuel injection pump drive shaft, to allow removal of the pump.
Applications: John Deere 6059 and 6068 engines
Alternative to OEM JDG1560
Superseded from JDG670A
Universal 10105 24539 42890 Light Duty U Joint Puller Tool for Drivelines with 1" to 1.25" Bearing Cups
This Universal Light Duty U Joint Puller was designed for drivelines found on class 1-3 trucks, cars and farm machinery.
Fits for Dodge Ram 1500 / 3500, Chevrolet 1500 / 3500, Ford F-350 / 550 and other light duty vehicle's U-joints with bearing cups 1 inch to 1.25 inches O.D.
Direct replacements for 10105, 24539 and 42890.
This heavy duty extractor will safely disassemble drivelines on virtually all cars without hammering or heating components avoiding damaging the Driveshaft, Yokes, Joints or Bearing Cups. Our easy to use puller reduces risks and eliminates dangerous vice-and-socket or hammering methods.
Simply remove all fasteners from bearing cups. Slip the U-Joint Puller over the yoke of the drive line. Finally turn the tool’s forcing screw clockwise with up to a 1" impact wrench to complete the removal process.
For Pullers catalog click here
Looking for a different Puller? Please give us a call!! (909) 334-4400
Tillman John Deere JD-49 JD-53 JD-203 Clutch Alignment Tool Alt.
Application: 3010, 3020, 4000, 4010, 4020, and 4320
The clutch alignment tool or pilot tool works on 6 different tractors, the smaller end can be used on the 3000 series tractors and the larger end works on the 4000 series tractors
Alternative to JD-49 JD-53 and JD-203
7121 John Deere, Caterpillar, Waukesha, Case, White, GM Fuel Injector Puller Tool Alt.
Heavy duty specialty puller alternative to OEM part number OTC 7121.
Works on Case, Caterpillar, GM, John Deere, Waukesha and White diesel engines
Designed to remove pencil nozzles used in many agricultural and construction engines
The tool applies straight, even pulling power without damaging components
For Caterpillar Tools Catalog click here
Looking for a different Case, White, John Deer, Waukesha Tractor tool? Please give us a call!! (909) 334-4400
Tillman 7121 Fuel Injector Puller Tool - Nozzle Puller/Remover Alt.
Application: Case, Caterpillar, GM, John Deere, Waukesha and White Diesel Engines
This Nozzle Puller/Remover Tool is designed to remove pencil nozzles on Diesel engines.
This tool applies straight even pulling power through a slide hammer assembly. The job is done quickly and without damaging components.
John Deere JDE92 21mm Injector Nozzle Socket Tool Alt.
This JDE92 Injector Socket Kit is designed to remove and install the injector nozzles on all tractors which are equipped with the Robert Bosch KDEL 21mm type injection nozzle. Easy and convenient to use, save your time and effort. Makes adjusting the nozzles a breeze.
The Injector Socket Tool is compatible with John Deere 3029, 4039, 4045, 6059, 6068, 6076, 6081, 6101, 6466 and 6619 engines.
Alternative for Part Number JDE92 & 7458.
Made of premium material, engineered for durability and long lifespan. High strength metal construction, stronger, long-term service for your repair work. Black coating finish, good rust, wear and corrosion resistance.
Comes with 3 pack items, combination usage. The inner sleeve can effectively fix the nozzle, and the outer sleeve is used to loosen or tighten the gland nut of the nozzle.
Tillman John Deere JDE81-1 Engine Turning Tool Alt.
Applications: 4024, 4039, 4045, 4239, 4276, 6359, 6619, 6059, 6068, 6076, 6081, 6090, 6105, 6125 and 6135 tractors
Alternative to OEM JDE81-1 (formerly version of JDG820)
Tillman John Deere JDG10246A Servicegard Cam Timing Pin Alt.
Use to lock engine at top dead center (TDC) and to adjust unit injector preload
Tool fits notches on camshaft timing wheel
Application: JDG John Deere engines
Alternative to OEM JDG10246A
Tillman John Deere KJD10164 Front Crankshaft Oil Seal Installer Alt.
Use to install front crankshaft oil seal in engines with composite timing gear cover.
Application: John Deere Powertech Engines 3029,4039,4045,6059 and 6068
Alternative to OEM KJD10164
Fuel Injector Nozzle Puller Tool Alternative to OTC 7121
Ferrum has designed this nozzle puller to remove pencil nozzles used in many agricultural and construction engines.
The tool applies straight, even pulling power without damaging components.
Works on Case, Caterpillar, GM, John Deere, Waukesha and White diesel engines.
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right..
Tillman John Deere KJD10422 Servicegard Seal Installer Alt.
Use to install the king pin seal ring DANA axle
Application: John Deere Equipment
Alternative to OEM KJD10422
Tillman John Deere JDG820 Engine Turning Tool Alt.
Used to rotate engine flywheel to lock engine at "TDC" to check high pressure fuel pump timing.
Applications: John Deere 4024, 4039, 4045, 4239, 4276, 6359, 6619, 6059, 6068, 6076, 6081, 6090, 6105, 6125 and 6135 engines
Alternative to OEM JDG820
High Quality Aftermarket Tool
Tillman John Deere JDG1515 5030 6059 Fuel Injection Nozzle Tool Alt.
Used to removed the injectors from Powertech engines 4.5L and 6.8L
Application: John Deere Models 3029, 4024, 4039, 4045, 5030 or 6059 RSN Fuel Injectors.
Alternative to OEM JDG1515
High quality aftermarket tool
Tillman John Deere JDH-3C JDH-3D Steering Valve Adjustment Tool Alt.
Application: John Deere 3020, 4000, 4020, 4320, 4520, and 4620 tractors
This one tool can be used on 6 different tractors for adjusting the steering valve
Alternative to OEM JDH-3C / JDH-3D
Tillman John Deere JDG10576 Engine Barring Tool Alt.
Use to rotate engine for service, setting valves, and locating top dead center
Application: John Deere Engines
Alternative to OEM JDG10576
Tillman John Deere JDE83 JDE81-4 Engine Turning &Timing Pin Kit Alt.
Application : John Deere 3179, 4239, 6359, 4276, and 6414 Engines
Used to rotate flywheel on engines with 142 tooth flywheel ring gear and a 26.5 mm (1.04 in.) ID flywheel housing guide bore diameter
Alternative to OEM JDE83 & JDE81-4 tools
Tillman John Deere JDG1253 Servicegard Ring Gear Hub Retaining Socket Alt.
Alternative to OEM JDG1253
Tillman John Deere JDG476 JDG477 JDG478 404 466 6076 Rear Crankshaft Main Seal Installer Alt.
Equivalent to JDG476 JDG477 JDG478 seal installer tool both in function and performance
This tool was designed fit for John Deere teflon seals such as RE520036, RE530121, RE504363, RE524227, RE22764, AR34682, and AR30382.
Use to simultaneously install the Teflon unitized seal and wear sleeve on the engine rear crankshaft flange. The driver acts as a pilot to install rear oil seal in the housing eliminating the need for a dial indicator to measure.
Works on engines 6-404 and 6-466 found in tractor models 4000 4010 4020 4040 4045 4230 4240 4250 4320 4430 4440 4450 4520 4620 4630 4640 4650 4840 4850 6076 6081 6466 7020 8430 8440 8450. Works on engines 6-404 and 6-466 found in combine models 6600 6602 6620 6622 7700 7720 7722 8820.
Constructed from high standard forged steel for strength, durability, and longevity; coated with black oxide finish for resistance to rust and corrosion.
Tillman John Deere KJD10420 Servicegard Seal Remover Alt.
Use with KML10018-4 and KML10018-7 to assemble the hydraulic steering assembly
Alternative to OEM KJD10420
John Deere JDG300 6531 & 6619 Rear Crankshaft Wear Sleeve & Teflon Seal Installer Tool Alt.
Direct replacement for OEM parts JDG300, JDG309, JDG310 and supersedes JDE-68. Fits seals AS210102, RE13310, AR48492, AR101833 and RE13312.
Applications: John Deere 5010, 5020, 6030, 7520, 8630, 8640, 8650 and other AG and Industrial equipment using the John Deere 531 and 619 engines.
This tool will avoid any damage to teflon surface by installing the Teflon seal with wear sleeve on rear crankshaft flange at the same time.
Manufactured with high quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable.
Tillman John Deere JDG954B Crankshaft Gear and Front Oil Seal Installer Alt.
Applications: John Deere 1039, 4045, 6059 and 6068 engines.
Replacement for John Deere tool number JDG-954B.
Used to install the crankshaft gear and front oil seal (part number RE538097 DZ111671), this is a set of professional tools that help do the repair work easily and quick, in the mean time it won’t do any damage to the crankshaft.
Tillman John Deere JT30040B Crankshaft Rear Main Seal Installer Alt.
Applications:
John Deere 4045 Engines, 5075E & JD models (820 3cyl.) (830 3cyl.) 1020 1520 2020 2510 2520 1530 2030 2630 2040 2240 2440 2640 2840 2940 2150 2350 2550 2750 2950 3150 2155 2355 2555 2755 2955 3055 3155 3255 4030 (4050 w/ 359 engine only) 5200 5300 5400 5500 6100 6200 6300 6400 and many more AG & Industrial equipment using the 152 164 180 202 219 239 276 329 359 414 2.9L 3.9L 4.5L 5.9L 6.8L 3029 3039 4039 4045 6059 JD engines.
Replacement for JT30040B or KCD10002A
Used to easily and quickly install Crankshaft Rear Oil Seal/Wear Sleeve without removing the engine.
Fit for John Deere standard flat housing rear seals such as AR92893, AT22965, RE11036, RE17831, RE24959, RE35885, RE44574 and RE537070. Use JDG476 or ONI423H for Teflon seals such as RE520036, RE530121, RE504363, RE524227, RE22764, AR34682, and AR30382.
Tillman John Deere JDG2074A Servicegard Damper Puller Alt.
Used to pull damper from tapered crankshaft nose
Application: JDG John Deere Engines
Alternative to OEM JDG2074A
