Submit search
Tillman Cummins 34900 Water Sensor Wrench (OEM Version)
Removes and Installs the Water Sensor Located on the Fuel Filter on 2012 and Newer 6.6L Duramax Diesel Engines, 2013-2017 Ram Trucks with The 6.7L Cummins Engine
For use when replacing the fuel filter or when servicing the water sensor. The plastic sensor has a new hex design that is easily damaged by tools, like pliers, that do not specifically fit the sensor.
Similar to Lisle 34900 (OEM Version)
For Dodge Tools Catalog click here
Looking for a different Dodge, Chrysler or Jeep tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Tillman 3824498 Cummins 3.9L, 5.9L, & 6.7L Front Cover Crankshaft Seal Installer 1338
Used to correctly place the crankshaft sealing ring during the installation process, avoid any leakage due to uneven placement and make the work proceed in a correct and orderly manner.
Applications include Paccar PX-6, 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L.
If you're working on an ISB in a medium duty application it will require front installer 3164659 instead.
Alternative to OEM 3824498
For Cummins Tools Catalog click here
For Paccar Tools Catalog click here
Looking for a different Cummins or Paccar Tool? Please give us a call!! (909) 334-4400
Tillman 3824500 Cummins 6.7L 5.9L 3.9L Front Crankshaft Wear Sleeve Installer Tool Alt.
Applications include Paccar PX-6, 1989 and newer Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L. This tool can be used on crankshafts with or without the alignment dowel.
Looking for a different Cummins Tool? Please give us a call!! (909) 334-4400
Tillman 5046 Cummins Crankshaft Wear Sleeve Install Tool Alt.
Applications: 1989-2016 Cummins 4BT 3.9L, B series 5.9L, ISB 5.9L 6.7L, QSB 5.9L 6.7L and Paccar PX-6.
Used for installing the front crankshaft wear sleeve, avoiding any leakage due to uneven placement and making the job done right and in order.
Made of top high quality and wear resistance steel, durable and strong enough, repeatedly tested and optimized to ensure its excellent performance and lasting service time.
Kent-Moore J-37716-2 Volvo Guide Pin
Used with J-37716-B
Applications: MACK E-6 and E-7 / E-7 ETECH
Manufacturer: SPX/Bosch (OTC Rotunda Kent-Moore Miller)
For Volvo Tools Catalogue click here
Looking for a different Volvo Tool? Please give us a call!! (909) 334-4400
Freedom 3415 Crankshaft Sprocket Counterhold
Used to counterhold crankshaft toothed belt sprocket when renewing crankshaft oil seal.
Applications:
This is a high-quality aftermarket product.
For Audi Tools Catalogue click here
For VW Tools Catalogue click here
Looking for a different Audi or VW Tool? Please give us a call!! (909) 334-4400
Tillman 3163069 Cummins ISX Injector Cam Gear Puller Tool Alt.
Used to pull the injector and valve cam gears on Cummins engines quickly and effective.
Application include Freightliner, International and Kenworth trucks with Cummins ISX engines from 2007 to 2016.
Direct replacement to Cummins OEM part number 3163069.
Freedom J-36418-C Turbine Shaft Seal Installer Protector Set Alt
Includes High-Quality Aftermarket Equivalents of J-36418-1B & J-36418-2A
Replaces J-36418 and J-36418-B
Applications: 4L60E 4L60-E
For General Motors Tools Catalog click here
Looking for a different General Motors Tool? Please give us a call!! (909) 334-4400
Atec-Trans Tools T-1574 GM 700R4 4L60E 1982-1997 Non 300MM Shaft Input Shaft Seals Installer & Resize Set
Cummins/Paccar 3824078 Rear Crankshaft Seal & Wear Sleeve Installer Alt.
Direct replacement to Cummins OEM 3824078
Applications include Paccar PX-6, PX-8, 1989-2016 Cummins 4BT 3.9L, ISC 8.3L, B Series 5.9L, ISB, ISL 5.9L 6.7L and QSB 5.9L 6.7L.
Includes equivalent of 3163734, 3163628 and 3163741.
Required to install crank seals on Cummins B & C series.
Looking for a different Cummins or Paccar tool? Please give us a call!! (909) 334-4400
Ford 303-1259 ZTSE4691 6.4L Powerstroke Front Crankshaft Seal Wear Ring Installer Alternative
Applicable to:
Medium Duty , Heavy Duty , Severe Series , 2007 MaxxForce 7 , AC / UC & HT / TC Commercial Bus , AE, BE, CE & Integrated Bus , DuraStar , TerraStar , Base Engine , 12 Engine Systems
This Front Crankshaft Seal & Wear Ring Installation Tool is a direct replacement for Rotunda parts 303-1259, ZTSE4691, 6889 and ST-142.
Designed to fit oil seals 3C3Z-6700-BA / 3C3Z6700BA / 1835376C1 found in 2008-2010 F250, F350, F450, F550, 6.4 Liter Ford Powerstroke engines, and VT365-MaxxForce7 Navistar International.
Heavy duty specialty tool made to eliminate lip flare on the wear sleeve and remove the crankshaft front seal for Ford 6.4L Powerstroke Diesel Engines.
For Ford Tools Catalog click here
Looking for a different Ford tool? Please give us a call!! (909) 334-4400
Tillman Cummins 3164780 ISX QSX ISX15 ISX12 Rear Crankshaft Seal & Wear Sleeve Installer w/ Seal Remover Tool Alt.
Direct replacement for OEM Part Number 3164780 3162994 4965569
Used to effortlessly remove and install the crankshaft rear seal and wear ring/sleeve on diesel engine properly.
This specialty tool 3164780 help reduce risk of crankshaft seal surface damage during removal. Also the rear seal and wear ring is automatically installed to the proper depth with this specialty tool 3164780, prevents damaging the rear seal and leakage.
Application: Cummins ISX QSX ISX15 ISX12 diesel engines.
Tillman John Deere KJD10164 Front Crankshaft Oil Seal Installer Alt.
Use to install front crankshaft oil seal in engines with composite timing gear cover.
Application: John Deere Powertech Engines 3029,4039,4045,6059 and 6068
Alternative to OEM KJD10164
For John Deere Tools Catalog click here
Looking for a different John Deer tool? Please give us a call!! (909) 334-4400
Tillman Cummins/Paccar 3824078 Rear Crankshaft Seal and Wear Sleeve Installer Tool Alt.
Required to install crank seals on B & C series.
Applications include PX-6, PX-8, 1989-2016 4BT 3.9L, ISC 8.3L, B Series 5.9L, ISB, ISL 5.9L 6.7L and QSB 5.9L 6.7L
Alternative to OEM 3824078
Mitsubishi Fuso & CAT MH061470 6M60 Rear Crankshaft Seal Slinger Installer Alt.
Alternative to OEM parts number MH061470 & 6M60
This installation tool is design to work on genuine oil seal number ME034976 with a dimension of 108*140*180*17mm.
Application include Mitsubishi Fuso and Caterpillar (CAT) engines 6M60, 4D31, 4D34, 4M50, 6D31, 6D34, 6D14, 6D16, 6M60 and GM60.
Mitsubishi trucks have a slinger or wear ring installed onto the crank that prevents it from wearing a grove and eliminates the need of crankshaft replacement. Using our tool will prevent leaks when servicing these trucks. The depth of the slinger is critical.
For Mitsubishi Fuso Tools Catalog click here
Looking for a different Mitsubishi Fuso Tool? Please give us a call!! (909) 334-4400
Tillman Cummins 3824499 Front Cover Crankshaft Seal Installer Tool Alt
Applications: Dodge Cummins C Series, Paccar PX-8, ISC 8.3L and ISL9 L9 9.0L.
Used to place the crankshaft seal properly when installing, avoiding any leakage due to uneven placement and making the job done right and in order.
Heavy duty steel structure machined, welded and finished with powder coating for professional level reliability and durability. It can prevent the tool from corrosion and rust. High precision and hardness to provide a much longer service life.
Tillman T10134 VW/Audi Rear Crankshaft Seal Installer Alt.
Used for fitting sealing flange with integrated sender wheel, 4-cyl diesel engine
This Crankshaft Seal Installer tool is specifically designed for Volkswagen Golf, Touran and Audi A3 4. It is also suitable for other four-cylinder diesel engine applications including 1.4i Turbo, 1.4/1.6 Direct Injection(Gasoline), 1.9/2.0 SDI, 2.0 TDi. 2.0 Common Rails (Diesel)
Equivalent to OEM T10134
Looking for a different Audi/VW tool? Please give us a call!! (909) 334-4400
Tillman Cummins/Paccar 5395259 2063800090 Rear Crankshaft Seal and Wear Sleeve Installer Tool Alt. ST-224-C
Design to install and remove the crankshaft rear seal and wear sleeve, saving time and reducing risk of crankshaft seal surface damage during removal.
Applications include Paccar PX-6, PX-8, 1989 & newer Cummins 4BT 3.9L, B Series 5.9L, ISB, ISL 5.9L 6.7L, QSB 5.9L 6.7L ,ISC 8.3L and ISL9 L9 9.0L
Works on seal number 5259499,3926126 and MAHLE 67857. Equivalent of 3824078,3163734, 3163628, 2063800090 & 3163741.
Hino S0940-71030 J05C J08C J05D J08E J05E Rear Crankshaft Seal Installer Alt.
Direct Replacement to OEM factory number 09407-1040A, 09407-1040, S094071040 and S0940-71040.
Applications include engines J05C, J08C, J05D, J08E and J05E.
Used to safely install the crank rear main seal on Hino trucks 15 and 17 tons with AZ4079-F seals.
This heavy duty aftermarket tool is designed to prevent damage when installing it the oil seal in your truck.
For Hino Truck Tools Catalog click here
Looking for a different Hino Tool? Please give us a call!! (909) 334-4400
Tillman Cummins 3164606 ISX X15 Cylinder Liner Installer Tool Alt.
Help install antipolising rings without damaging the liner and antipolising ring
This liner press works on flat-top and grooved-top liners.
Install the 3164606 cylinder liner installation tool over the antipolising ring and puller plate. Thread it down slowly, pressing the antipolising ring into the liner counterbore
Alternative to OE# 3164606
Tillman Isuzu EN-50611 NPR 4JJ1 Front Crankshaft Oil Seal Installer Tool Alt. 8-98158110-0
Direct Replacement to OEM part number EN-50611.
Applications include Isuzu 4JJ1 mechanical engine 3.0L 3500, 3500HD and 4500 medium duty from 2016 and 2017.
This installer is used to align the rear cover plate and install the rear crankshaft oil seal with or without a wear sleeve.
Oil Seal Genuine #: XZ1262E, 8-98158110-0
For Isuzu Tools Catalog click here
Looking for a different Isuzu Tool? Please give us a call!! (909) 334-4400
Hino S0940-71030 JO5C JO8C JO8E Front Crankshaft Seal Installer Tool Alt.
Direct replacement to OEM parts number S0940-71030, 09407-1030A or 09407-1030.
Designed to install front main seal BZ4820E on J05C, J08C, J08E, Hino + UD trucks and Hino truck 10.5, 15 and 17 tons with the J05 and J08 engines.
Fits Hino series 1996-2003 * FB4J RANGER 4 J05C * FC3J RANGER 5 J07C * FD1J RANGER 6 J08C * FD2J RANGER 6 J08C * FF1J RANGER 8 J08C * FG1J RANGER 9 J08C * FM1J RANGER 14 J08C * FT1J RANGER 5Z J08C * GD1J RANGER 7 J08C * GH1J RANGER 10 J08C * GT1J RANGER 8Z J08C
Fits Hino Series 2003-2008 * FB4J RANGER PRO 4 J05C * FC4J RANGER PRO 5 J05C * FD1J RANGER PRO 6 J08C * FG1J RANGER PRO 9 J08C * FL1J RANGER PRO 12 J08C * FM1J RANGER PRO 14 J08C * FT1J RANGER PRO 5z J08C * GD1J RANGER PRO 7 J08C * GH1J RANGER PRO 10 J08C * GT1J RANGER PRO 8z J08C
Tillman Cummins 4918991 ISX12 ISX15 Front Crankshaft Seal Remover & Installer Tool Alt.
Application: Cummins ISX12 and ISX15 with single overhead cam.
For ISX & QSX need to use tool TIL178T
Designed to remove and install the front crankshaft seal and wear sleeve without any damage or leakage, which helps you finish the process at ease.
Made of premium sturdy steel, impact resistant and wear resistant, durable and anti-corrosion for providing much longer service time.
Alternative to part number 4918991 both in function and performance. It is precisely manufactured and tested to meet original equipment standards and performance.
Kent-Moore J-46390 Detroit Diesel Rear Seal Installer
This tool installs the rear seal on the MBE 900 and Detroit Diesel applications
For Detroit Diesel Tools Catalog click here
Looking for a different Detroit Diesel Tool? Please give us a call!! (909) 334-4400
OTC Toyota 09223-15030 Crankshaft Rear Oil Seal Replacer
For Toyota/Lexus
Reference Part Number: 210
ESSENTIAL TOOL, DRAWER #3
Use with 09620-30010-02
For Toyota Tools Catalogue click here
Looking for a different Toyota Tool? Please give us a call!! (909) 334-4400
Ford 303-762 ZTSE4517 6.0L Powerstroke Front Crankshaft Seal & Wear Ring Remover Tool Alternative
Applicable to: 2004 - 2007 VT 275 , 2004 - 2007 VT 365 , 2007 MaxxForce 5 , 2007 MaxxForce 7 , 2010 MaxxForce 7 , 9000i Series , AC / UC & HT / TC Commercial Bus , AE, BE, CE & Integrated Bus , CityStar / CF Series , CXT, MXT , DuraStar , TerraStar , TranStar , Base Engine , 12 Engine Systems
This Front Crankshaft Seal & Wear Ring Extractor Tool is a direct replacement for Rotunda OEM parts 303-762, ZTSE4517, 6886 and ST-130.
Designed to fit for 2008-2010 F250 F350 F450 F550 F650 F750 Low Cab Forward, E-Series, Excursion, Ford Powerstroke 6.0L diesel engines, and VT365 MaxxForce7 Navistar International.
Heavy duty puller made to eliminate lip flare on the wear sleeve and remove the crankshaft front seal for Ford 6.0L Powerstroke Diesel Engines.
This specialty tool is essential when replacing the 3C3Z6700BA, 1833655C2 or 1837597C1 front crankshaft seal.
VW/Audi Genuine OEM T20143 VW/Audi Crankshaft / Power Steering Seal Puller
Special order. Ships in 5-7 days
Used when replacing crankshaft oil seal on timing chain end.
Used to pry out sealing ring in power steering pump drive.
Also suitable for some power steering seals.
Made in Germany
T20143 includes T20143/1 and T20143/2.
Ford 303-1260 ZTSE4705 6.4L Powerstroke Front Crankshaft Seal Wear Ring Remover Tool Alternative
Applications: VT 365-MaxxForce7, 6.4L Powerstroke Diesel
This Front Crankshaft Seal Wear Ring Extractor Tool is a direct replacement for Rotunda parts 303-1260 or ZTSE4705.
Designed to fit 2008-2010 F250, F350, F450, F550, 6.4 Liter Ford Powerstroke engines, and VT365-MaxxForce7 Navistar International.
This puller is used to remove wear sleeves without a flange. Use 303-D060 for wear sleeves with flange like 8C3Z-6700-B.
Tillman Isuzu Duramax J-44642 6.6L Rear Crankshaft Seal & Wear Sleeve Installer Alt.
Direct Replacement to OEM part number J-44642
Applications: Isuzu 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6 liter Duramax diesel engines.
Used to install the seal to correct depth and alignment. The crankshaft rear seal is fitted to both the engine block and crankshaft. Fit of the inner and outer seal bodies is critical and any misalignment can result in leakage.
Tillman 1264 Duramax Turbo Vane Position 66mm 6-Point 3/8" Square Drive Sensor Socket
Used to remove the turbo vane position sensor 12643471 on 2004 to current Duramax and ISUZU F Series Diesel Engines. Fits the confined location between the cold and hot sides of the turbo.
Applications: Chevrolet GMC Silverado Sierra 6.6L Duramax LLY LBZ LMM LML & Isuzu F Series Diesel Engines 2004-up
A must on medium duty trucks. Deep socket design provides proper depth and clearance to access sensor hex
Looking for a different Isuzu or GM tool? Please give us a call!! (909) 334-4400