Home > Shop By Brand > Kent-Moore Tools >

Kent-Moore EN-49805 Installation Adapters, Pilot Bearing
Kent-Moore EN-49805 Installation Adapters, Pilot Bearing

Note: The product title and description supersede the image shown.
The image provided by the manufacturer is not always exact.
We may use the same image for multiple sizes of an item.


  
Tillman Tools Price: $557.88
Manufacturer Part Number: EN-49805
Note: We ship from different warehouses across the country. No local pickups.


SKU: KMTEN-49805
Qty:

Description
 
Kent-Moore Tools
Kent-Moore EN-49805 Installation Adapters, Pilot Bearing

The LS9 crankshaft rear flange has (9) M11 mounting bolts. Current Gen VI V8 engines have (6) M11 mounting bolts and use J-8433 Bridge and J-45949 Pilot Bearing Installer to seat the pilot bearing to its designed depth. EN-49805 is a set of three M11 x M10 studs and hardware that allow J-45949 to be used with any 2/3-way balancer puller, such as currently Essential J-24420-C. The EN-49805 studs are threaded into 3 of the crankshaft bolt holes, and J-45949 and the pilot bearing are placed into the pilot bearing bore. J-24420-C is placed over the M10 end of the studs and attached with the included hardware. The forcing screw on J-24420-C is tightened against J-45949, and used to seat the pilot bearing to its designed depth, ensuring the transmission pilot will not bind.
Note:
  • Our vendors continue to have issues with Global Supply Chain across a range of categories and components impacting our ability to provide detailed/ planned delivery timing across a large swath of our Product Portfolio. These categories impacted include (but are not limited to) such lower-level products as: steel, plastic, electrical component, and microprocessor chips. These ongoing issues, often with last minute notification from the supply base, have negatively impacted planned production beyond our control.

Be the first to write a review »