Submit search
91-818162 18-9870 Mercury Mercruiser Bellow Ring Installation Tool Alt.
Designed to install the aluminum ring into the Alpha 1 Generation 2, Bravo, Blackhawk U-Joints Bellows.Used with:
Our tool is used with the ONI219B Outdrive Coupler Alignment Tool.
This specialty tool will not damage your ring like aluminum installers can.
Direct replacement to Mercury / Mercruiser OEM Parts Number 91-818162 & Sierra 18-9870.
For Mercury Outboard Tools Catalogue click here
Looking for a different Yamaha Outboard tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
Mercruiser Alpha Bravo Gimbal Bearing Grease Seal Installation Tool
Designed to fit Mercruiser Bravo, OMC Cobra, Pre Alpha (R), Alpha 1 (MR), GEN 2, All #1 Drives from 1966 to the present.
Our tool is used with the ONI219B Outdrive Coupler Alignment Tool to install the grease seal.
This seal installer will allow you to drive the grease seal in straight for proper installation.
We Will Help You Find the Right Marine Specialty Tools and Parts for your Boat Repair and Maintenance Needs. We Offer a Variety of Aftermarket and OEM Parts to Cover your Engine, Fuel System, Ignition, Intake, Propellers, Motors and More. When it comes to accessories, we have that covered too.
For Brush Research catalog click here
Looking for Brush Research Products? Please give us a call!! (909) 334-4400
Kent-Moore J-43783 Allison Output Shaft Seal Installer
J-43783 has been classified by Allison Transmission as an Essential Maintenance & Overhaul Tool servicing 1000 & 2000 Product Families
Manufacturer: SPX/Bosch (OTC Rotunda Kent-Moore Miller)
For Kent-Moore catalog click here
Looking for Kent-Moore Tools? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job
Cummins Dodge 3824498 3.9L 5.9L 6.7L Front Cover Crank Seal Installer Alt.
Alternative to OEM 3824498 and 1338.
Installation tool for seal numbers 3937111 and 3904353 or seal from kit 3802820.
Fits Dodge Cummins 3.9L 5.9L 6.7L, including 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L,1989-current
Applications also include Paccar PX-6, 1989-2016 engine.
This repair tool is made to properly place the crank seal without leaks. Installing the seal uneven can cause it to leak prematurely.
Made from high-quality materials with precision to aid our mechanic community
For Dodge Tools Catalog click here
For Cummins Tools Catalog click here
Looking for a different Dodge Cummins Tool? Please give us a call!! (909) 334-4400
OTC 27487 Bearing & Seal Installer Small Handle
Component of OTC 27793 Driver Tools Starter Set
For OTC Tools Catalog click here
Looking for a different OTC Tool? Please give us a call!! (909) 334-4400
Ford Oil Rail Ball Tube Socket Tool +O-Ring+Injector Seal Kit for 6.0L 2003-2007
This kit will help you to repair the oil rail leak without replacing the entire rail. Any worn injector O-rings will need replaced. Direct replacement to work in an easier way can save your time and money.
The socket is made of Hardened 4140 Impact Grade Steel with great durability, impact and wear resistance, anti-rust..
Kit includes: 1/2" Drive Nipple Cup Socket; 8PCS Heavy Duty Viton O-Rings
For Ford Tools Catalog click here
Looking for a different Ford tool? Please give us a call!! (909) 334-4400
Astro Pneumatic 7824 Bearing Race and Seal Driver Master Set
• Makes it easier to insert wheel bearing race and seals without damage to race and axle housing• Set includes nine disc sizes to fit most standard wheel bearings• Turn discs over to drive seals• Set includes the following parts:
No. 1 - Size 1.565"No. 2 - Size 1.750”No. 3 - Size 1.965"No. 4 - Size 2.325"No. 5 - Size 2.470”No. 6 - Size 2.555"No. 7 - Size 2.830”No. 8 - Size 2.995"No. 9 - Size 3.180”
For Astro Pneumatic catalog here
Looking for Astro Pneumatic Products? Please give us a call !! (909) 334-4400
Detroit Diesel W541589003400 DD13 DD15 Front Crankshaft Seal Installer Ring Tool Alternative
Direct replacement for Detroit Diesel OEM parts W541589003400 or 541589003400 used with ONI216T or W541589023300. Also sold as a kit.
Applications include DD13 and DD15 Detroit Diesel engines commonly found on the Freightliner Cascadia truck.
Heavy duty aftermarket specialty tool designed for the installation of the new wax-coated front crank oil seal without having to use any lubrication. This new adapter ring tool installs the seal to the correct depth.
Manufactured with high quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable.
For Freightliner Truck Tools catalog click here
For Diesel Tools Catalog click here
Looking for a different Detroit Diesel or Freightliner truck Tool? Please give us a call!! (909) 334-4400
Kent-Moore J-24171-A Universal Seal Remover Set
Seal Remover (Used with seals that include a Dust Shield provision)
Applications: Allison
For Kent-Moore Tools Catalog click here
Looking for a different Kent-Moore Tool? Please give us a call!! (909) 334-4400
Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. We specialize in auto, aviation, boat & motorcycle, serving the institutions of military, government, emergency response & education for over 50 years. Find vehicle-specific tools, as well as DIY, boutique
Toyota/Lexus 09260-39015-01 Injector Seal Tool Set ST-S918 Alt
Includes High-Quality Stallion Alternatives of 09268-03020-01 and 09268-03010-01
Applications Include Lexus.
This tool comes with a lifetime warranty!
When you buy Stallion Products you know you are getting the same tool so many others have used successfully. Don't try to save a few bucks at the expense of your engine - know that you're getting quality from Stallion Products.
For Stallion Tools catalog click here
Looking for Stallion Tools? Please give us a call!! (909) 334-4400
303-1259 ZTSE4691 Ford 6.4L Powerstroke Crankshaft Front Seal Installer Kit Alt.
Applications:
For installation of crankshaft front seal for 6.4L Powerstroke .This tool is needed to prevent your seal from leaking.
Replaces 303-1259 ZTSE4691
Constructed with high quality carbon steel, which is the best quality of those markets in sale, with great strength and durability for years of trouble-free use.
Atec-Trans Tools T-1574 GM 700R4 4L60E 1982-1997 Non 300MM Shaft Input Shaft Seals Installer & Resize Set
For General Motors Tools Catalog click here
Looking for a different General Motors Tool? Please give us a call!! (909) 334-4400
John Deere JDE92 21mm Injector Nozzle Socket Tool Alt.
This JDE92 Injector Socket Kit is designed to remove and install the injector nozzles on all tractors which are equipped with the Robert Bosch KDEL 21mm type injection nozzle. Easy and convenient to use, save your time and effort. Makes adjusting the nozzles a breeze.
The Injector Socket Tool is compatible with John Deere 3029, 4039, 4045, 6059, 6068, 6076, 6081, 6101, 6466 and 6619 engines.
Alternative for Part Number JDE92 & 7458.
Made of premium material, engineered for durability and long lifespan. High strength metal construction, stronger, long-term service for your repair work. Black coating finish, good rust, wear and corrosion resistance.
Comes with 3 pack items, combination usage. The inner sleeve can effectively fix the nozzle, and the outer sleeve is used to loosen or tighten the gland nut of the nozzle.
For John Deere Tools Catalog click here
Looking for a different John Deer tool? Please give us a call!! (909) 334-4400
Ford 303-770 4.5L 6.0L 6.4L Powerstroke Crankshaft Rear Seal Installer Tool Alt.
Direct OEM replacement to 303-770, ZTSE4515C, ZTSE4515, 6885 or ST-106
Used for Ford 2003-2010 F-250, F350, F-450, F-550, Excursion 2004-2007 F-650, F-750 2004-2010 E150, E-250, E-350, E-450, Low Cab Forward 4. 5L, 6.0L, 6.4L and Navistar International VT365-MaxxForce7.
This tool will cover multiple diesel engines such as 6.4L F-250 350/450/550 Super Duty, 2008, 2009, 2010, F-Super Duty 250-550 Ford Vehicles and 4.5L Low Cab Forward 2006, 2007, 2008, 2009 engines.
Applications include 6.0L Diesel F-250/350/450/550 Super Duty 2004, 2005, 2006, E-Series 2004, 2005, 2006, 2007, 2008, 2009, 2010, F-650/750 Super Duty 2004, 2005, 2006, 2007, F-Super Duty 250-550 Ford Vehicles and 6.0 Diesel Excursion 2004 & 2005.
This tool is designed to eliminate lip flare on the wear sleeve and install the seal properly, preventing it from leaking.
For Navistar Truck Tools Catalog click here
Looking for a different Ford or Navistar truck tool? Please give us a call!! (909) 334-4400
Ford DCT DPS6 Auto Dual Clutch Transmission Seal Installer Tool Kit Alt.
Applications: Focus Festiva DCT DPS6
Designed to install and remove the input seal on your DCT Dual Clutch Transmission to prevent seal from cracking, damaging and deformation. This tool does the smaller seal the one that fails and wets the Dual Clutch.
Made of heavy duty steel for professional level reliability and durability, coated with a glossy black coating for rust and corrosion resistance. Manufactured to original specification, even exceed the OEM standard. Can be used continuously for many years without failure.
Kit includes: 1PC large seal remover and installer, 1PC small seal remover, 1PC small seal installer, 1PC case seal (larger) and 1PC input seal (small).
Isuzu EN-50351 4JJ1 4JB1 4JG1 4JH1 Rear Crankshaft Seal Installer Tool Alt.
Direct replacement to OEM parts number EN-50351, EN50351, 588402359, 5884023590 and 5-8840-2359-0.
Applications for this kit include Isuzu 3.5 Ton 4JB1, 4JG1, 4JH1, 4JJ1 (130HP/150HP).
This tool was designed to install oil seals BZ4962-E or 8-97071561 and prevent damage during installation process.
Heavy duty steel structure machined and finished with powder coating to resist corrosion and ensure a long-term and reliable performance.
For Isuzu Tools Catalog click here
Looking for a different Isuzu Tool? Please give us a call!! (909) 334-4400
Isuzu EN-50611 NPR 4JJ1 Front Crankshaft Oil Seal Installer Tool Alt.
Direct Replacement to OEM part number EN-50611.
Applications include Isuzu 4JJ1 mechanical engine 3.0L 3500, 3500HD and 4500 medium duty from 2016 and 2017.
This tool is design to install 2011 and newer 4JJ1 3.0L diesel engine crankshaft seals that are installed into the cover over the end of the crankshaft. The seal pilots over the end of the crank, and must be drawn evenly into position in the cover over the crankshaft.
The center screw of this seal installer threads into the end of the crankshaft, and pulls the installer cover evenly against the seal to position the seal into the cover.
Ford/Lincoln/Mercury 205-422 205-153 Wheel Hub Oil Seal Installer with Handle Alt.
This specialty tool is essential when replacing the 10.5" hub seals on single or dual wheel axle assemblies and the seal installer adapter is driven with the 7" detachable handle.
This Wheel Hub Oil Seal Installer Tool set was designed to fit:
Direct replacement for Rotunda OEM parts 205-422, 205-153, ZTSE2365A, ZTSE4164A, ZTSE4776 ZTSE4898 and T80T-4000-W.
For Lincoln Vehicle Tools click here
For Mercury Vehicle Tools click here
Looking for a different tool? Please give us a call!! (909) 334-4400
Ford 303-761 6.0L Powerstroke Front Crankshaft Seal & Wear Ring Installer Tool Alt.
This tool is a direct replacement for Rotunda OEM parts 303-761, ZTSE4516, 6887 and ST-107.
Designed to fit 2008-2010 F250 F350 F450 F550 F650 F750 Low Cab Forward, E-Series, Excursion, Ford Powerstroke 6.0L diesel engines, and VT365 MaxxForce7 Navistar International.
Heavy duty specialty tool made to eliminate lip flare on the wear sleeve and remove the crankshaft front seal for Ford 6.0L Powerstroke Diesel Engines.
This specialty tool is essential when replacing the 3C3Z6700BA, 1833655C2 or 1837597C1 front crankshaft seal and is also sold in a master kit to cover multiple engines.
For Navistar International Truck Tools Catalog click here
Looking for a different Ford or Navistar International truck tool? Please give us a call!! (909) 334-4400
Tillman John Deere JDG476 JDG477 JDG478 404 466 6076 Rear Crankshaft Main Seal Installer Alt.
Equivalent to JDG476 JDG477 JDG478 seal installer tool both in function and performance
This tool was designed fit for John Deere teflon seals such as RE520036, RE530121, RE504363, RE524227, RE22764, AR34682, and AR30382.
Use to simultaneously install the Teflon unitized seal and wear sleeve on the engine rear crankshaft flange. The driver acts as a pilot to install rear oil seal in the housing eliminating the need for a dial indicator to measure.
Works on engines 6-404 and 6-466 found in tractor models 4000 4010 4020 4040 4045 4230 4240 4250 4320 4430 4440 4450 4520 4620 4630 4640 4650 4840 4850 6076 6081 6466 7020 8430 8440 8450. Works on engines 6-404 and 6-466 found in combine models 6600 6602 6620 6622 7700 7720 7722 8820.
Constructed from high standard forged steel for strength, durability, and longevity; coated with black oxide finish for resistance to rust and corrosion.
Genuine T20143 VW/Audi Crankshaft / Power Steering Seal Puller
Used when replacing crankshaft oil seal on timing chain end.
Used to pry out sealing ring in power steering pump drive.
Also suitable for some power steering seals.
T20143 includes T20143/1 and T20143/2.
For Audi Tools Catalogue click here
For VW Tools Catalogue click here
Looking for a different Audi or VW Tool? Please give us a call!! (909) 334-4400
Volvo D13 & Mack 88800619 Rear Crankshaft Oil Seal Installer Tool Set Alt.
This alternative seal installer fits 7" crank seal 22191895. Made to aid the mechanic prevent the crankshaft rear main seal from damage when installing it.
For 7" crank seals 1543896 & 20441481 you will need ONI206T press style specialty tool or ONI207T driver style tool alternative to 9998238.
When working on 6" Crank Seal 20441697 use 251T heavy duty installation tool alternative to 88800561 for Volvo D11 & Mack MP7 engines.
Direct replacement for Volvo OEM part number 88800619. This professional tool kit fits D13 diesel engines.
Also a Volvo Penta Tool
For Volvo Tools Catalogue click here
For Mack Tools Catalog click here
Looking for a different Volvo or Mack Tool? Please give us a call!! (909) 334-4400
BMW Front & Rear Crankshaft Oil Seal Remover & Installer Tool Kit Alt.
Fits N40, N42, N45, N45T, N46, N46T, N52, N52K, N53, N54 and N55 BMW engines
OEM Alternative to 119181 119182 119183 119184 119185 119220 119230 and 110370.
Applications include:
For BMW Tools Catalog click here
Looking for a different BMW tool? Please give us a call!! (909) 334-4400
John Deere JDG476 Rear Crankshaft Seal Installer Alt.
Includes equivalent to: John Deere Servicegard JDG477 JDG478
Use JDG476 or ST-198 for teflon seals (such as RE520036¸ RE530121¸ RE504363¸ RE524227¸ RE22764¸ AR34682¸ and AR30382).Use ST-218 or JT30040B for standard flat housing rear seals (such as AR92893¸ AT22965¸ RE11036¸ RE17831¸ RE24959¸ RE35885¸ RE44574¸ RE538097 and RE537070) but it doesn't work on generator or implement engines
Works on engines 6-404 and 6-466 found in tractor models 4000 4010 4020 4040 4045 4230 4240 4250 4320 4430 4440 4450 4520 4620 4630 4640 4650 4840 4850 6076 6081 6466 7020 8430 8440 8450
Works on engines 6-404 and 6-466 found in combine models 6600 6602 6620 6622 7700 7720 7722 8820
You'll find Stallion Products are widely considered the most heavy duty on the market! This is a high-quality tool and you will be pleased with your purchase. This tool is needed to prevent your rear seal from leaking. Don't try to save a few bucks at the expense of your engine - know that you're getting quality from Stallion Products. Even the tool's ball bearings are made in the USA!
SES T20143 VW/Audi Crankshaft / Power Steering Seal Puller
Ford 303-1510 6.7L Powerstroke Front Crankshaft Seal Remover Alt.
Designed to easily and quickly remove the front crankshaft seals, this professional tool will absolutely save your time and energy to do the work, in the meantime it will protect the crankshaft off damage during the operation.
Replace OEM 303-1510 and ST-152, this is a special made professional tool that exceed OEM specification, manufactured to be top grade precision.
Made of premium quality carbon steel with black coated for rust and corrosion resistance, hardened construction for high strength and impact resistance, this tool is top quality and durability that can serve for a much longer time.
Cummins Truck ISX QSX Engine Rear Seal Installer and Remover Heavy Duty Diesel Kit Alternative to OEM 3164780
For Cummins Catalog click here
Looking for Cummins Tools? Please give us a call!! (909) 334-4400
Kent-Moore J-45391-1 Front Radial Seal Installer
This tool is used to install the front crankshaft seal.
Applications Include Detroit Diesel MBE4000.
Kent-Moore Tools Catalog click here
SES T40320B VW/Audi Crankshaft Oil Seal Installer
The tool is needed to fit the oil seal on the crankshaft.
Monaco 50123 J-37715-A Mack Front Crankshaft Seal Installer
For Mack E7 & E-Tech Engines
Replacement part for Rear Crankshaft Seal/Wear Sleeve Installer
Looking for a different Mack Tool? Please give us a call!! (909) 334-4400