 |
 |
 |
|
OTC Tools OTC 6525 LeakMaster Evaporative Emissions System Tester. LeakMasters simple two-step process makes testing todays most advanced OBD-II systems quick and easy. You simply connect the unit to the vehicles EVAP service port and battery. The OTC LeakMaster 6525 can be calibrated to identify leaks at .020 and .040 (thousandths of an inch). There is a feature setting on the control valve making it capable of detecting leaks much smaller than .020, allowing the unit to keep pace with testing standards as they change. The OTC LeakMaster 6525 indicates, with a Pass/Fail, if the system being tested has unacceptable leakage. Theres no more guesswork. With LeakMaster, when you see the smoke, youve found the leak! If the OTC LeakMaster 6525 confirms the existence of excessive leakage in the system, simply switch the unit into phase-two testing, which introduces non-toxic diagnostic smoke with UltraTraceUV technology. Locating the area of any leak is simple, just look for the smoke exiting at the point of leakage. The UltraTraceUV dye will help you pinpoint the exact point of any leak during and after testing. Its that simple! LeakMaster offers state-of-the-art control for troubleshooting state-of-the-art systems. The OTC LeakMaster 6525 precisely controls critical pressure and flow rates needed for testing todays advanced OBD-II EVAP systems. The OTC LeakMaster 6525s diagnostic smoke and UV dye have undergone extensive testing by major auto manufacturers, is approved for use in OBD-II EVAP systems, and meets the most stringent OEM requirements. A truly versatile unit for testing a wide range of systems. The OTC LeakMaster 6525 is designed to work with either nitrogen or shop air. In addition to its EVAP capabilities, the OTC LeakMaster 6525 also locates wind and water leaks, vacuum/induction leaks, climate control vacuum leaks, exhaust leaks, and many other closed system leaks. And, all testing is safely performed with the engine off. Inexpensive to operate, the OTC LeakMaster 6525 is user-refillable and will complete about 1,000 tests per smoke solution refill. LeakMasters precision and accuracy help you keep pace with standards for years to come. The OTC LeakMaster 6525s precision and accuracy in detecting OBD-II EVAP leaks gives the unit the ability to keep pace with testing standards as they evolve, making it the right solution for EVAP system testing for years to come. No. 6525 OTC LeakMaster Specifications: Height 23 in. (58.4 cm) Width 18 in. (45.7 cm) Depth 9-1/2 in. (24.1 cm) Weight 17 lb. (7.6 kg) Ship Weight 20 lb. (9.0 kg) Power Supply 12-volt DC Amperage Usage 15 amps Supply Pressure 13.0 in. H20 Supply Volume 15 liters per minute Operating Temp. Range 45 F to 140 F (7.2 C to 60 C) Smoke Supply Line 12 feet (3.6 m) Power Supply Line 12 feet (3.6 m) Remote Starter Cable 12 feet (3.6 m) Accessories: (Included with 6525; also available separately): CEA-01 3-1/2" Diameter Exhaust Cone (Qty. 2) CEA-02 Assorted Cap Plug Kit CEA-03 Smoke Diffuser Adapter HS-400AC 400,000 CP Spotlight with 20 ft. Cord and Battery Clips CEA-04 Standard SVC Port Adapter CEA-041 25 ft. Nitrogen Coiled Hose CEA-042 Small SVC Port Adapter CEA-049 Double Ended Schrader Remover Tool SR00 Water Trap Filter.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Note:
- Our vendors continue to have issues with Global Supply Chain across a range of categories and components impacting our ability to provide detailed/ planned delivery timing across a large swath of our Product Portfolio. These categories impacted include (but are not limited to) such lower-level products as: steel, plastic, electrical component, and microprocessor chips. These ongoing issues, often with last minute notification from the supply base, have negatively impacted planned production beyond our control.
|
|
|
|
|
|
|